1.5KE150C-E3/54
| Model | 1.5KE150C-E3/54 |
| Description | Trans Voltage Suppressor Diode, 1500W, 121V V(RWM), Bidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-2 |
| PDF file | Total 6 pages (File size: 95K) |
| Chip Manufacturer | VISHAY |
1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A
www.vishay.com
Vishay General Semiconductor
TransZorb
®
Transient Voltage Suppressors
FEATURES
•
Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
Case Style 1.5KE
• AEC-Q101 qualified
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
PRIMARY CHARACTERISTICS
V
BR
uni-directional
V
BR
bi-directional
P
PPM
P
D
I
FSM
(uni-directional only)
T
J
max.
6.8 V to 540 V
6.8 V to 440 V
1500 W
6.5 W
200 A
175 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case:
Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals:
Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Note
•
1.5KE250A to 1.5KE540A and 1.5KE250CA to 1.5KE440CA for
commercial grade only
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use C or CA suffix (e.g.
1.5KE440CA)
Eletrical characteristics apply in both directions.
Polarity:
For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS
(T
A
= 25 °C unless otherwise noted)
PARAMETER
Peak pulse power dissipation with a 10/1000 μs waveform
(1)
(fig. 1)
Peak pulse current with a 10/1000 μs waveform
(1)
Power dissipation on infinite heatsink at T
L
= 75 °C (fig. 5)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only
Maximum instantaneous forward voltage at 100 A for uni-directional only
(3)
Operating junction and storage temperature range
(2)
SYMBOL
P
PPM
I
PPM
P
D
I
FSM
V
F
T
J
, T
STG
VALUE
1500
See next table
6.5
200
3.5/5.0
- 55 to 175
UNIT
W
A
W
A
V
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2)
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3)
V = 3.5 V for 1.5KE220A and below; V = 5.0 V for 1.5KE250A and above
F
F
Revision: 22-Nov-11
Document Number: 88301
1
For technical questions within your region:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
