• Inventory
  • Products
  • Technical Information
  • Circuit Diagram
  • Data Sheet
Data Sheet
Home > Data Sheet > 29F800
29F800

29F800

Model 29F800
Description 8M (1M X 8/512K X 16) BIT
PDF file Total 48 pages (File size: 516K)
Chip Manufacturer FUJITSU
FUJITSU SEMICONDUCTOR
DATA SHEET
DS05-20841-4E
FLASH MEMORY
CMOS
8M (1M
×
8/512K
×
16) BIT
MBM29F800TA
-55/-70/-90
/MBM29F800BA
-55/-70/-90
s
FEATURES
• Single 5.0 V read, write, and erase
Minimizes system level power requirements
• Compatible with JEDEC-standard commands
Uses same software commands as E
2
PROMs
• Compatible with JEDEC-standard world-wide pinouts
48-pin TSOP(I) (Package suffix: PFTN – Normal Bend Type, PFTR – Reversed Bend Type)
44-pin SOP (Package suffix: PF)
• Minimum 100,000 write/erase cycles
• High performance
55 ns maximum access time
• Sector erase architecture
One 16K byte, two 8K bytes, one 32K byte, and fifteen 64K bytes.
Any combination of sectors can be concurrently erased. Also supports full chip erase.
• Boot Code Sector Architecture
T = Top sector
B = Bottom sector
• Embedded Erase
TM
Algorithms
Automatically pre-programs and erases the chip or any sector
• Embedded Program
TM
Algorithms
Automatically writes and verifies data at specified address
• Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
• Low Vcc write inhibit
3.2 V
• Erase Suspend/Resume
Suspends the erase operation to allow a read data in another sector within the same device
• Hardware RESET pin
Resets internal state machine to the read mode
• Sector protection
Hardware method disables any combination of sectors from write or erase operations
• Temporary sector unprotection
Temporary sector unprotection via the RESET pin.
Embedded Erase
TM
and Embedded Program
TM
are trademarks of Advanced Micro Devices, Inc.
Go Upload

* Only PDF files are allowed for upload

* Enter up to 200 characters.