4001023041323L9
| Model | 4001023041323L9 |
| Description | Res,SMT,Thin Film,132K Ohms,150WV,.01% +/-Tol,-5,5ppm TC,2010 Case |
| PDF file | Total 6 pages (File size: 95K) |
| Chip Manufacturer | VISHAY |
Space Applications Only
PHR
www.vishay.com
Vishay Sfernice
ESCC (
) 4001/023 Qualified High Precision (5 ppm, 0.01 %),
Thin Film Chip Resistors
FEATURES
• Load life stability at ± 70 °C for 2000 h:
0.15 % under Pn
• Low temperature coefficient down to ± 5 ppm/°C
• Very low noise (< - 35 dB) and voltage coefficient
(< 0.01 ppm/V)
Vishay Sfernice Thin Film division holds ESCC QML
qualification (ESCC technology flow qualification).
These High-Rel. components are ideal for low noise and
precision applications, superior stability, low temperature
coefficient of resistance, and low voltage coefficient, Vishay
Sfernice’s precision thin film wraparound resistors exceed
requirements of MIL-PRF-55342G characteristics Y
(± 10 ppm/°C).
• Resistance range: 10
to 3 M (depending on size)
• Laser trimmed tolerances to ± 0.01 %
• TCR in lot tracking
5 ppm/°C
• Termination: Thin film technology
• SnPb terminations over nickel barrier
• ESCC 4001 (generic specifications)
• ESCC 4001/023 (detailed specifications)
• ESCC qualified
• SMD wraparound chip resistor
• Operating temperature range: - 65 °C to + 155 °C
• From 0402 to 2010
• Material categorization: For definitions of compliance
please see
www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
ESCC
SIZE VARIANT
NUMBER
0402 13 and 14
0603 01 and 05
0805 02 and 06
1206 03 and 07
2010 04 and 08
RATED
POWER
RESISTANCE
AT + 70 °C
RANGE
(Pn)
W
(1)
10 to 150K
10 to 500K
10 to 750K
10 to 3.5M
10 to 6M
0.05
0.1
0.125
0.25
0.50
LIMITING
ELEMENT
VOLTAGE
(UL)
V
(1)
30
35
75
100
150
INSULATION
VOLTAGE
(U
i
)
V
50
100
200
300
300
TOLERANCE
±%
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
0.01, 0.02, 0.05, 0.1
TEMPERATURE
COEFFICIENT
± ppm/°C
5, 10, 25
5, 10, 25
5, 10, 25
5, 10, 25
5, 10, 25
PHR 0402
(2)
PHR 0603
PHR 0805
PHR 1206
PHR 2010
Notes
(1)
PHR 0402: Qualification ongoing.
(2)
Limiting voltages and power rating are already derated (for maximum ratings admissible, refer to P chip:
www.vishay.com/cod?53017).
CLIMATIC SPECIFICATIONS
Operating temperature
range
Soldering temperature
(T
sol
)
- 65 °C; + 155 °C
260 °C, immersion 10 s
MECHANICAL SPECIFICATIONS
Substrate material
Technology
Film
Protection
Terminations
Alumina
Thin Film
Nickel Chromium
with mineral
passivation
Epoxy and silicone
B type:
SnPb over nickel barrier
for solder reflow
(3)
G type:
Gold
Note
(3)
For B terminations use recommended reflow profile #1 as per
Application Note “Guidelines for Vishay Sfernice Resistive and
Inductive Components” (document number: 52029)
Revision: 26-Mar-14
Document Number: 53037
1
For technical questions, contact:
sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
