5962-0824203KEX
| Model | 5962-0824203KEX |
| Description | 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 10Mbps, HERMETIC SEALED, SMD, DIP-16 |
| PDF file | Total 11 pages (File size: 364K) |
| Chip Manufacturer | AVAGO |
ACPL-267XL, ACPL-268KL, ACPL-560XL,
ACPL-563XL, 5962-08242*
Hermetically Sealed, 3.3V High Speed, High CMR,
Logic Gate Optocouplers
Data Sheet
*See Selection Guide for full matrix of part numbers.
Description
These units are single and dual channel, hermetically
sealed optocouplers. The products are capable of opera-
tion and storage over the full military temperature range
and can be purchased as either standard commercial
product or with full MIL-PRF-38534 Class Level H or K
testing or from DSCC Drawing 5962-08242. All devices
are manufactured and tested on a MIL-PRF-38534 certi-
fied line and are included in the DSCC Qualified Manu-
facturers List QML-38534 for Hybrid Microcircuits.
Features
•
Low power consumption
•
3.3V supply voltages
•
Dual marked with device part number and DSCC
drawing number
•
Manufactured and tested on a MIL-PRF-38534
Certified Line
•
QML-38534, Class H and K
•
Three hermetically sealed package configurations
•
Performance guaranteed over full military
temperature range: -55°C to +125°C
•
High speed: 10 Mbd typical
•
CMR: > 10,000 V/µs typical
•
1500 Vdc withstand test voltage
•
TTL circuit compatibility
Enable
H
H
L
L
L
H
Truth Table
(Positive Logic)
Multichannel Devices
Input
On (H)
Off (L)
Output
Single Channel DIP
Input
On (H)
Off (L)
On (H)
Off (L)
Output
L
H
H
H
•
HCPL-260L/060L/263L/063L function compatibility
Applications
•
Military and aerospace
•
High reliability systems
•
Transportation, medical, and life critical systems
•
Line receiver
•
Voltage level shifting
•
Isolated input line receiver
•
Isolated output line driver
•
Logic ground isolation
•
Harsh industrial environments
•
Isolation for computer, communication, and test
equipment systems
Functional Diagram
Multiple channel devices available
V
CC
V
E
V
OUT
GND
The connection of a 0.1 µF bypass capacitor between V
CC
and GND is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
