5PSI-G-CGRADE-MV-SMINI
| Model | 5PSI-G-CGRADE-MV-SMINI |
| Description | Peizoresistive Sensor, |
| PDF file | Total 4 pages (File size: 155K) |
| Chip Manufacturer | AMPHENOL |
MillivoltOutputMiniaturePressureSensors
C-Grade
Pressure Sensors
General Description
O
The Millivolt Output pressure sensors is based upon a proprietary packaging technology to reduce output offset or common mode errors.
This model provides a calibrated millivolt output with good output offset characteristics. In addition the sensor utilizes a silicon,
micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. This series is
intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The C-GRADE is a lowest cost version
of the millivolt output pressure sensors.
The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable.
e
www.allsensors.com
a
16035 Vineyard Blvd. Morgan Hill, CA 95037
p
408 225 4314
f
408 225 2079
B
O
S
Applications
• Medical Instrumentation
• Environmental Controls
• HVAC
Physical Dimensions
Two Pressure Port Same Side
Dual in Line (DIP)
All Sensors
DS-0099 Rev A
O
B
O
S
E
L
E
T
Two Pressure Port Same Side
Gage Version single port on top
all sensors
E
L
Features
• 0 to 0.3 PSI to 0 to 30 PSI Pressure Ranges
• 1 % linearity version
• Temperature Compensated
• Calibrated Zero and Span
E
T
