5SWO-CT-125.000
Model | 5SWO-CT-125.000 |
Description | Oscillator |
PDF file | Total 3 pages (File size: 172K) |
Chip Manufacturer | MERCURY |
CLOCK OSCILLATORS
“SWO” series
Logic: TTL / HCMOS
Wave Form: Square wave
MERCURY
Since 1973
Besides low cost general purpose crystal clock oscillators Mercury also offers high quality and field-
proven application-specific oscillators for applications such as
♦
CPU, graphics, multimedia A/V clocks
♦
Fast Ethernet and Gigabit Ethernet clocks
♦
MPEG / DVD / HDTV clocks
♦
NTSC / PAL encoder/decoder clocks
♦
Laser engine pixel / set-top clocks
♦
PLL / synthesizer clocks
♦
Spread spectrum low EMI clocks
♦
Fibre channel and ADSL clocks
♦
OC-3, OC-12, OC-48 and OC-192 clocks
♦
SONET / SDH / ATM clocks
Mercury has the right oscillators to meet your specifications and your applications.
“SWO” Series General Specifications
Input Voltage (V
DD
)
Mercury Model
Frequency Range
Output Logic
Output Voltage HIGH “1”
Output Voltage LOW “0”
Rise Time / Fall Time
(0.1V
DD
↔
0.9 V
DD
)
TTL load
Fanout
CMOS load
T
A
=+25°C, V
DD
at specified voltage, CL=15 pF
V
DD
= +3.3 V D.C. ±10%
3SWO
1.0 ~125.0 MHz
TTL / HCMOS
2.97 V min.
0.33 V max.
7 n sec. max.
V
DD
=+5.0 V D.C.±10%
5SWO
1.0 ~ 125.0 MHz
TTL / HCMOS
4.5 V min.
0.5 V max.
10 n sec. max.
10 LS TTL gates max.
10 LS TTL gates max.
15 pF
15 pF
1.8 ~ 32 MHz: 15 mA max.
1.9 ~ 32 MHz: 25 mA max.
Current Consumption
32+~50 MHz: 16.5 mA max.
32+~50 MHz: 35 mA max.
50+~100 MHz: 35 mA max.
50+~100 MHz: 40 mA max.
Commercial
±25 ppm over 0°C to +70°C (Stability code is “A”)
(0°C to +70°C)
±50 ppm over 0°C to +70°C (Stability code is “B”)
Temperature code
±100 ppm over 0°C to +70°C (Stability code is “C”)
Frequency
is ‘C”
If non-standard please enter the desired stability after “C”. For example “C20”
Stability
(1)
represents ±20 ppm over 0 to +70°C
±25 ppm over -40°C to +85°C (Stability code is “D”)
Industrial
±50 ppm over -40°C to +85°C (Stability code is “E”)
(-40°C to +85°C)
±100 ppm over -40°C to +85°C (Stability code is “F”)
Temperature code
If non-standard please enter the desired stability after “
I
”. For example
is ‘
I
”
“
I
20” represents ±20 ppm over -40 to +85°C
Duty Cycle
50%±10%. (50±5% is also available)
1.0 ~ 32 MHz: 5 m sec. max.
Start-up Time (Ts)
32+ ~ 125 MHz: 10 m sec. max.
Note: Pad No. 1 is Tri-State by default for all SWO series. That is:
Pad 1
The output (pad No. 3) is active if no connection or voltage of 2.2V or greater is applied to pad 1.
Connection
The output (pad No. 3) is high impedance when voltage of 0.8V or lower is applied to pad 1.
Disable time is 150 n sec. max.; Enable time is 10 m sec. max.
Aging
±5 ppm per year max.
(1)
Inclusive of 25°C tolerance, operating temperature range, ±10% input voltage variation, load change, aging,
shock and vibration.
Taiwan: TEL (886)-2-2695-7099, FAX (886)-2-2695-7473, e-mail: sales-tw@mercury-crystal.com
U.S.A.: TEL (1)-909-466-0427, FAX (1)-909-466-0762, e-mail:
sales-us@mercury-crystal.com
MERCURY
Page 1 of 3
Date: Jan. 23, 2005
Rev. 2
MERCURY
www.mercury-crystal.com