70.0000MHZMP2410/50/-10+60/8PF
| Model | 70.0000MHZMP2410/50/-10+60/8PF |
| Description | Parallel - 3Rd Overtone Quartz Crystal, 70MHz Nom, ROHS COMPLIANT, SMD, 4 PIN |
| PDF file | Total 1 pages (File size: 130K) |
| Chip Manufacturer | EUROQUARTZ |
EURO
QUARTZ
11.4 x 5.0mm SMD Crystal
FEATURES
Frequency range 3.20MHz to 70.0MHZ
Fully RoHS compliant
Two height profiles available, 4.8 or 3.8mm
Standard EIA tape and reel supply
DESCRIPTION
MP24 and MP25 crystals provide an ideal source of low frequency
clock signals (from 3.5MHz) in a low-profile SMD package. The part is
electrically and mechanically compatible with traditional industry SMD
packages and may be used as a 'drop-in' replacement.
MP24, MP25 CRYSTALS
3.2MHz to 70MHz
OUTLINE & DIMENSIONS
USE WITH DOUBLE-SIDED PCBs
MP24 and MP25 crystals are designed for top board assembly and
one solder reflow process. Do not reflow this part with the can
inverted.
SPECIFICATION
Frequency Range
AT-Cut Fundamental:
AT-Cut 3rd Overtone:
BT-Cut Fundamental:
Calibration Tolerance at 25ºC*:
Frequency stability
AT-Cut from:
BT-Cut from:
Storage Temperature:
Equivalent Series Resistance:
Shunt Capacitance (C0):
Load Capacitance (CL):
Ageing:
Drive level:
Reflow Soldering:
Packaging:
3.20MHz to 48.0MHz
27.0MHz to 70.0MHz
24.0MHz to 48.0MHz
from ±10ppm at 25°C
(±30ppm standard)
±10ppm over-10° to +60°C
±50ppm over -10° to +60°C
-40°~+85°C
See table
7pF maximum
Series or from 8pF to 32pF
(Customer specified CL)
<±3ppm per year at +25°C
100µW typical, 500µW maximum
10s maximum at 260°C twice
or 180s at 230°C, once.
24mm EIA tape and reel, 1k per.
PART NUMBER GENERATION
EQUIVALENT SERIES RESISTANCE
Frequency
Range MHz
3.2~3.4
3.5~6.0
6.1~10.0
10.1~48.0
ESR
Ohms Max.
300
120
60
40
Frequency
Range MHz
27.0~30.0
30.1~50.0
50.1~70.0
Frequency
Range MHz
24.0~48.0
ESR
Ohms Max.
150
100
80
ESR
Ohms Max.
40
Part numbers for MP24/25 crystals are generated as follows:
Example:
3.6864MHz MP24 30/50/-10+60/12pF 50R
AT-Cut Fundamental
AT-Cut 3rd Overtone
Nominal Frequency
Package MP24 or MP25
Calibration tolerance
at 25°C (±ppm)
Temperature Stability
over temp. range (±ppm)
Operating Temp. Range (°C)
(Lower and upper limits)
Load Capacitance
(Either SR for series or CL in pF)
Equivalent Series Resistance
(Optional - use when special
value is required)
BT-Cut Fundamental
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk
