A2559
| Model | A2559 |
| Description | PROTECTED QUAD POWER DRIVER |
| PDF file | Total 8 pages (File size: 121K) |
| Chip Manufacturer | ALLEGRO |
2559
UDx2559LB
1
16
PROTECTED
QUAD POWER DRIVER
Providing improved output current limiting, the UDK, UDN, and
UDQ2559B, EB, and LB quad power drivers combine AND logic
gates and high-current bipolar outputs with complete output protection.
Each of the four outputs will sink 700 mA in the on state. The outputs
have a minimum breakdown voltage (load dump) of 60 V and a
sustaining voltage of 40 V. The inputs are compatible with TTL and
5 V CMOS logic systems.
IN
4
IN
3
ENABLE
GROUND
GROUND
V
CC
IN
2
IN
1
Data Sheet
29317.14B
UDx2559B
OUT
4
K
OUT
3
GROUND
GROUND
OUT
2
K
OUT
1
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Over-current protection for each channel has been designed into
these devices and is activated at approximately 1 A. It protects each
output from short circuits with supply voltages up to 25 V. When an
output current trip point is reached, that output stage is driven linearly
resulting in a reduced output current level. If an over-current or short-
circuit condition continues, the thermal-limiting circuits will first sense
the rise in junction temperature and then the rise in chip temperature,
further decreasing the output current. Under worst-case conditions,
these devices will tolerate short circuits on all outputs, simultaneously.
These devices can be used to drive various loads including incan-
descent lamps (without warming or limiting resistors) or inductive
loads such as relays, solenoids, or dc stepping motors.
The suffix ‘B’ devices are 16-pin power DIPs, the suffix ‘EB’
devices are 28-lead power PLCCs and suffix ‘LB’ devices are 16-lead
power SOICs for surface-mount applications. All three packages are
of batwing construction to provide for maximum package power
dissipation.
Dwg. PP-017-1
ABSOLUTE MAXIMUM RATINGS
at T
A
= 25°C
Output Voltage, V
OUT
. . . . . . . . .
60 V
Over-Current Protected Output Voltage,
V
OUT
. . . . . . . . . . . . . . . . . . .
25 V
Output Current, I
OUT
. . . . . . . . .
1.0 A*
Supply Voltage, V
CC
. . . . . . . . . .
7.0 V
Input Voltage, V
IN
or V
EN
. . . . . .
7.0 V
Package Power Dissipation,
P
D
. . . . . . . . . . . . . . . .
See Graph
Operating Temperature Range, T
A
Prefix ‘UDK’ . . . .
-40
°
C to +125
°
C
Prefix ‘UDN’ . . . . .
-20
°
C to +85
°
C
Prefix ‘UDQ’ . . . . .
-40
°
C to +85
°
C
Storage Temperature Range,
T
S
. . . . . . . . . . . .
-55
°
C to +150
°
C
*Outputs are peak current limited at
approximately 1.0 A per driver. See
Circuit Description and Application for
further information.
FEATURES
s
s
s
s
s
s
s
700 mA Output Current per Channel
Independent Over-Current Protection for Each Driver
Thermal Protection for Device and Each Driver
Low Output-Saturation Voltage
Integral Output Flyback Diodes
TTL and 5 V CMOS Compatible Inputs
Pin-Compatible With UDQ2543B/EB and UDK2549B/EB
Always order by complete part number: a prefix to
indicate operating temperature range + the basic four-digit
part number + a suffix to indicate package style, e.g.,
UDK2559LB
.
