• Inventory
  • Products
  • Technical Information
  • Circuit Diagram
  • Data Sheet
Data Sheet
Home > Data Sheet > B10011
B10011

B10011

Model B10011
Description CAN TRANSCEIVER IC
PDF file Total 11 pages (File size: 117K)
Chip Manufacturer ATMEL
Features
Capability of Single-wire Operation
Hardware Fault Recognition
Inputs with High Common-mode and Differential-mode Interference Rejection Above
100 V
PP
due to External Filters at the Receiver Input
Immunity Against Electromagnetic Interference
Immunity Against Ground-voltage Offsets < 6 V
Ruggedized Against ESD by MIL-STD-883C, Method 3015
Benefits
Systems which employ this device have the following benefits compared to solutions
using discrete components:
High Reliability
CAN
Transceiver IC
B10011S
Applications
Especially Suited for Truck and Van Applications
Interface Between Truck and Trailer
Interface Between Dashboard and Engine
Description
The CAN driver IC B10011S is a low-speed, high-level interface for 24 V (27 V) opera-
tion with transmission levels according to ISO WD 11992-1 (point-to-point interface
between trucks and trailers). It is developed for signal levels of 8/16 V and a speed of
up to 250 kbits/s.
This device allows transmission, that is insensitive to electromagnetic interference.
Such interferences may especially occur in truck applications where (due to the length
of the wires) high common-mode voltages (e.g., 50 ) can be coupled into the lines.
This device contains a fault recognition circuit that detects faults on one of the two
wires, which are normally used for transmission. If a fault occurs the operation can be
switched from double-wire to single-wire mode thus, allowing proper operation even if
one wire is broken, has a short-cut or a high series resistance.
Figure 1.
Block Diagram
1
2
3
4
5
6
7
8
V
DD
V
SS
2.5 V
Error
control
+4.3 V
V
CC
Select
control
Compa-
rators
16
15
14
13
12
11
10
GND
9
Output
control
B10011S
Rev. 4749B–AUTO–09/04
Go Upload

* Only PDF files are allowed for upload

* Enter up to 200 characters.