C0402C221J1GAC7867
| Model | C0402C221J1GAC7867 |
| Description | Capacitor, Ceramic, Chip, General Purpose, 220pF, 100V, ±5%, C0G/NP0, 0402 (1005 mm), -55º ~ +125ºC, 13" Reel |
| PDF file | Total 19 pages (File size: 1011K) |
| Chip Manufacturer | KEMET |
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – C0G Dielectric, 10VDC-200VDC (Commercial Grade)
Packaging Information Performance Notes
Tape Width
8mm
12mm & 16mm
1.
Cover Tape Break Force:
1.0 Kg Minimum.
2.
Cover Tape Peel Strength:
The total peel strength of the cover tape from the carrier tape shall be:
Peel Strength
0.1 Newton to 1.0 Newton (10gf to 100gf)
0.1 Newton to 1.3 Newton (10gf to 130gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3.
Labeling:
Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Typical Pocket Centerline
Maximum Component Rotation
Side View
°
s
Bo
Tape
Maximum
Width (mm) Rotation (
8,12
20
16-200
10
°
T
)
Typical Component Centerline
Ao
Tape
Width (mm)
8,12
16-56
72-200
Maximum
Rotation (
20
10
5
°
S
)
Figure 4 – Maximum Lateral Movement
8mm & 12mm Tape
0.5 mm maximum
0.5 mm maximum
16mm Tape
1.0 mm maximum
1.0 mm maximum
Figure 5 – Bending Radius
Embossed
Carrier
Punched
Carrier
R
Bending
Radius
R
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1003_C0G • 8/10/2011
13
