C0402T182M9RBL7867
| Model | C0402T182M9RBL7867 |
| Description | Ceramic Capacitor, Ceramic, 6.3V, 20% +Tol, 20% -Tol, X7R, -/+15ppm/Cel TC, 0.0018uF, 0402, |
| PDF file | Total 8 pages (File size: 147K) |
| Chip Manufacturer | KEMET |
General Performance Characteristics & Electrical Parameters
EIA Case Sizes
Capacitance Range
Test Parameters
0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220, 2225
0.5pF – 22.0μF
Capacitance and Dissipation Factor measured at: C0G – 1kHz and 1 Vrms if capacitance
1000pF and 1MHz and 1 Vrms if capacitance
≤1000pF.
X7R – 1kHz and 1 Vrms if capaci-
tance
≤10μF
and 120Hz and 0.5 Vrms if capacitance >10μF.
Operating Temperature Range
-55°C to +125°C, with no bias capacitance shift limited to ±15% over that range
Capacitance Tolerances
Aging Rate
Voltage Rating
25°C IR @ Rated Voltage
Dielectric Strength (DWV)
B = ±.10pF; C = ± 0.25pF; D = ±0.5pF; F = ±1%; G = ±2%; J = ±5%, K = ±10%, M = ±20%
C0G – 0% maximum; X7R –2.0% maximum % capacitance loss/decade hour
6.3; 10; 16; 25; 50; 100; 200 Volts
1000MΩ−μF or 100GΩ, whichever is less
2.5 times rated DC voltage
These chips are supplied unmarked. If required, they can be laser-marked as an extra cost option. Details on the
marking format are included in KEMET Surface Mount Catalog F3102.
Marking
Soldering Process
The 0402 size is suitable for solder reflow only. The 0603, 0805 and 1206 sizes are suitable for either reflow or
wave soldering. Sizes 1210 and larger should be limited to reflow soldering only.
Recommended Solder Pad Dimensions
T - Total Length S - Separation
Chip Size
mm
0402
0603
0805
1206
1210
1812
1825
2220
2225
2.14
2.78
3.30
4.50
4.50
5.90
5.90
7.00
7.00
in.
0.084
0.109
0.130
0.177
0.177
0.232
0.232
0.275
0.275
mm
0.28
0.68
0.70
1.50
1.50
2.30
2.30
3.30
3.30
in.
0.011
0.027
0.028
0.059
0.059
0.091
0.091
0.13
0.13
mm
0.74
1.08
1.60
2.00
2.90
3.70
6.90
5.50
6.80
in.
0.029
0.043
0.063
0.079
0.114
0.146
0.272
0.216
0.268
mm
0.93
1.05
1.30
1.50
1.50
1.80
1.80
1.85
1.85
in.
0.037
0.041
0.051
0.059
0.059
0.071
0.071
0.073
0.073
W - Pad Width L - Pad Length
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com
