C0402T621J8RCL
| Model | C0402T621J8RCL |
| Description | Ceramic Capacitor, Multilayer, Ceramic, 10V, 5% +Tol, 5% -Tol, X7R, 15% TC, 0.00062uF, Surface Mount, 0402, CHIP |
| PDF file | Total 21 pages (File size: 1M) |
| Chip Manufacturer | KEMET |
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Commercial Off-the-Shelf (COTS) for Higher Reliability
Applications, X7R Dielectric, 6.3 – 250 VDC
Overview
KEMET’s COTS program is an extension of KEMET knowledge
of high reliability test regimes and requirements. KEMET
regularly supplies “up-screened” products by working with
customer drawings and imposing specified design and test
requirements. The COTS program offers the same high quality
and high reliability components as up-screened products,
but at a lower cost to the customer. This is accomplished by
eliminating the need for customer-specific drawings to achieve
the reliability level required for customer applications. A series
of tests and inspections have been selected to provide the
accelerated conditioning and 100% screening necessary to
eliminate infant mortal failures from the population.
KEMET’s X7R dielectric features a 125°C maximum operating
temperature and is considered “temperature stable.” The
Electronics Components, Assemblies & Materials Association
(EIA) characterizes X7R dielectric as a Class II material.
Components of this classification are fixed, ceramic dielectric
capacitors suited for bypass and decoupling applications or
for frequency discriminating circuits where Q and stability of
capacitance characteristics are not critical. X7R exhibits a
predictable change in capacitance with respect to time and
voltage and boasts a minimal change in capacitance with
reference to ambient temperature. Capacitance change is
limited to ±15% from -55°C to +125°C.
All COTS testing includes voltage conditioning and post-electrical
testing as per MIL–PRF–55681. For enhanced reliability, KEMET
also provides the following test level options and conformance
certifications:
Test Level A
Voltage Conditioning
DWV
IR@25°C
CAP
DF
PDA 8%
C of C
Test Level B
Voltage Conditioning
DWV
IR@25°C
CAP
DF
PDA 8%
DPA
C of C
Test Level C
Voltage Conditioning
DWV
IR@25°C
CAP
DF
PDA 8%
DPA
85/85
C of C
Ordering Information
C
Ceramic
1210
T
104
Capacitance
Code (pF)
K
Capacitance
Tolerance
5
Voltage
9 = 6.3 V
8 = 10 V
4 = 16 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
R
Dielectric
R = X7R
A
Failure Rate/Design
A = Group A Testing per MIL–
PRF–55681 PDA 8%
B= Group A Testing per MIL–
PRF–55681 PDA 8%, DPA
per EIA–469
C = Group A Testing per
MIL–PRF–55681 PDA 8%,
DPA per EIA–469, Humidity per
MIL–STD–202, Method 103,
Condition A
C
Termination
Finish
1
C = 100% Matte
Sn
L = SnPb (5%
minimum)
TU
Packaging/Grade
(C-Spec)
2
Blank = Bulk
TU = 7" Reel
Unmarked
TM = 7" Reel
Marked
Case Size Specification/
(L" x W")
Series
0402
0603
0805
1206
1210
1812
2220
T = COTS
2 Significant
J = ±5%
Digits + Number K = ±10%
of Zeros
M = ±20%
1
2
Additional termination finish options may be available. Contact KEMET for details.
Additional reeling or packaging options may be available. Contact KEMET for details.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1027_X7R_COTS_SMD • 1/9/2013
1
