CM5S1030
| Model | CM5S1030 |
| Description | Molded Ultra-Mini DYAD⑩ |
| PDF file | Total 4 pages (File size: 318K) |
| Chip Manufacturer | CLARE |
Molded Ultra-Mini DYAD
™
CM5
Features
•
Small size
•
SMT-compatible
•
Easily formed leads
•
Sputtered ruthenium contacts
•
Hermetically sealed contacts
•
Fast switching speed — up to 500Hz
•
Wide range of available magnetic sensitivities
•
Superior mechanical strength
•
Enhanced for better auto placement
Applications
•
Security
−
Proximity sensing
−
Smoke alarms
•
Automotive
−
Level sensor
−
Lamp current sensor
•
Relays
Description
Clare’s Molded Ultra-Mini DYAD
TM
is well suited for small,
signal switching applications. The small size lends itself
to surface mountable applications; working well on higher
density PC boards. The Molded Ultra-Mini DYAD
TM
has
sputtered ruthenium contacts and an extraordinary seal
strength achieved by a patented laser sealing of the leads.
In low level or dry switching environments, switches
typically exceed 1 billion operations. In addition, the
molding process provides a solid plastic outer shell. This
plastic shell provides superior mechanical strength,
eliminates concerns over handling glass switches, and
provides an ideal solution for high speed, automated
assembly environments.
Ordering Information
A complete part number is represented by the digits to
the right. For example, CM5S1030 is a MOLDED ULTRA-
MINI DYAD™ with a minimum operate value of 10NI and
a maximum of 30NI. Refer to the switch operating
specification charts for available ranges. Special ranges
are available upon request.
CM5 S XX XX
"S" for straight switch
Maximum
operate value
Minimum
operate value
Standard Test Coil
The magnetic force (expressed in NI, AT or Ampere Turns) required to cause the reed switch contacts to
close is called the pull-in or operate value.
CM5
Part #
Coil Definition
Coil Resistance
Number of Turns
Wire Size
Bobbin Diameter (inside cell)
Winding Length
Coil-1
NARM1 CTC01
1200Ω
5,000
0.0399mm (AWG 46)
3.96mm
10.4mm
Surface Mount Molded Ultra-Mini DYAD
Refer to operating characteristics table for complete part number.
Molded Ultra-Mini DYAD™
Part #
CM5S1015
CM5S1020
CM5S1030
CM5S1520
CM5S1525
CM5S2025
Operate Range (NI)
1
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
(1)
Consult factory for test procedure.
The reed switch shall be placed in the test coil with the gap centered in the core of the coil winding.
Test leads and their clips must be non-magnetic.
The longitudinal axis of the test coil and the test switch shall be vertical.
Molded Ultra-Mini DYAD™ Surface Mount
Part #
CM5-2319
CM5-2315
CM5-2376
CM5-2325
CM5-2341
CM5-2378
1
2
Operate Range (NI)
1,2,3
10 to 15
10 to 20
10 to 30
15 to 20
15 to 25
20 to 25
Tolerance =
±
1.5NI
Full Blade Sensitivity
3
Surface Mount Switches are packaged 3,000 parts per reel
DS-CM5-R1
www.clare.com
1
