CMX602A
| Model | CMX602A |
| Description | Calling Line Identifier plus Call Waiting Type II |
| PDF file | Total 25 pages (File size: 664K) |
| Chip Manufacturer | CMLMICRO |
CML Semiconductor Products
Calling Line Identifier
plus
Call Waiting (Type II)
D/602A/4 February 1998
CMX602A
Provisional Issue
Features
Applications
•
CLI and CIDCW System Operation
•
Low Power Operation 0.5mA at 2.7V
•
Zero-Power Ring or Line Reversal
Detector
•
FSK Demodulator with Data Retiming
•
High Sensitivity CAS Tone Detection
•
Low CAS Tone Falsing in CIDCW Mode
•
CLI and CIDCW Adjunct Boxes
•
CLI and CIDCW Feature Phones
•
Bellcore, ETSI, British Telecom and
Mercury Systems
•
Computer Telephone Integration
•
Call Logging Systems
•
Voice-Mail Equipment
1.1
Brief Description
The CMX602A is a low power CMOS integrated circuit for the reception of the physical layer signals used in
BT's Calling Line Identification Service (CLIP), Bellcore's Calling Identity Delivery System (CID), the Cable
Communications Association's Caller Display Services (CDS), and similar evolving systems. It also meets the
requirements of emerging Caller Identity with Call Waiting services (CIDCW).
The device includes a 'zero-power' ring or line reversal detector, a dual-tone (2130Hz plus 2750Hz) Tone Alert
Signal and a 1200-baud FSK V23/Bell202 compatible asynchronous data demodulator with a data retiming
circuit which removes the need for a UART in the associated µController.
It is suitable for use in systems to BT specifications SIN227 and SIN242, Bellcore GR-30-CORE and SR-TSV-
002476, CCA TW/P&E/312, ETSI ETS 300 659 parts 1 and 2, ETS 300 778 parts 1 and 2 and Mercury
Communications MNR 19.
©
1998 Consumer Microcircuits Limited
