EMSL13E2J-157.000M
| Model | EMSL13E2J-157.000M |
| Description | CRYSTAL OSCILLATOR, CLOCK, 157MHz, HSCL OUTPUT, ROHS COMPLIANT, PLASTIC, SMD, 6 PIN |
| PDF file | Total 2 pages (File size: 107K) |
| Chip Manufacturer | ECLIPTEK |
EMSL13
Series
• MEMS Clock Oscillator
• HCSL Output
• +3.3V Supply Voltage
• Complementary Output
• Output Enable and Standby Options
• 6 Pad Plastic SMD Package
• 30,000 G Shock Resistance
• RoHS Compliant (Pb-free)
H
L
W
EMSL13
0.85
7.0
5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Nominal Frequency (MHz)
Some frequencies within this range may
not be available
Operating Temperature Range
Storage Temperature Range
Supply Voltage (V
CC
)
Input Current
Excluding Load Termination Current
Frequency Tolerance / Stability
Inclusive of All Conditions: Calibration Tolerance at 25°C, Fre-
Some tolerance stability options
quency Stability over the Operating Temperature Range, Supply
may not be available
Voltage Change, Output Load Change, 1st Year Aging at 25°C,
Reflow, Shock, and Vibration
Output Voltage Logic High (V
OH
)
Output Voltage Logic Low (V
OL
)
Rise Time / Fall Time
20% to 80% of waveform
Duty Cycle
at 50% of waveform
Load Drive Capability
Output and Complementary Output
Logic Control / Additional Output
Output Control Input Voltage
V
IH
of 70% of V
CC
Minimum
No Connection
V
IL
of 30% of V
CC
Maximum
Without Load
Without Load
First Year at 25°C
Deterministic
Random
RMS
pk-pk
Cycle to Cycle
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
1.000MHz to 100.000MHz
100.001MHz to 156.250MHz
156.251MHz to 220.000MHz
SERIES
PACKAGE
VOLTAGE
1.000MHz to 220.000MHz
0°C to +70°C, -20°C to +70°C, or -40°C to +85°C
-55°C to +125°C
+3.3V
DC
±0.3V
DC
70mA Maximum
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
Output Enable Current
Standby Current
Aging
Start Up Time
Period Jitter
RMS Phase Jitter (Random)
Fj=637kHz to 10MHz
RMS Phase Jitter (Random)
Fj=1.5MHz to 22MHz
RMS Phase Jitter (Random)
Fj=1.875MHz to 20MHz
750mV
DC
Typical, 600mV
DC
Minimum
25mV
DC
Typical, 50mV
DC
Maximum
300pSec Typical, 350pSec Maximum
50 ±5(%)
50 Ohms to ground
Output Enable and Complementary Output,
or Standby and Complementary Output
Enables Outputs
Enables Outputs
Disables Outputs: High Impedance
65mA Maximum (OE)
30µA Maximum (ST)
±1ppm Maximum
10mSeconds Maximum
0.2pSec Typical
2.0pSec Typical
1.5pSec Typical, 3.0pSec Maximum
20pSec Typical, 25pSec Maximum
10pSec Typical
1.7pSec Typical
1.6pSec Typical
1.6pSec Typical
0.8pSec Typical
0.6pSec Typical
0.4pSec Typical
0.7pSec Typical
0.5pSec Typical
0.4pSec Typical
CLASS
REV
.
DATE
MANUFACTURER
CATEGORY
ECLIPTEK CORP.
OSCILLATOR
EMSL13
PLASTIC
3.3V
OS7P
10/11
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
