F05S05/1000Z
| Model | F05S05/1000Z |
| Description | INPUT 5W DC/DC CONVERTERS |
| PDF file | Total 2 pages (File size: 38K) |
| Chip Manufacturer | ETC |
A and F SERIES
Single and dual output
Recommended for new design-ins
•
•
•
•
•
•
•
Low noise
Linear regulation
Six sided shield
Pi input filter
Short circuit protected
High Isolation
Meets EN55022 and VDE0871 level B conducted noise
[ 2 YEAR WARRANTY ]
The A and F Series offer high input/output isolation of 500VDC with only 1mV
rms (40mV pk-pk) output ripple and noise. Other premium performance
features include line and load regulation of less than
±
0.1% and efficiencies of
up to 69%. The converters are encapsulated in a 2 x 2 inch industry standard
package with a 0.38 inch profile. The six sided copper case allows optimum
thermal conductivity and provides shielding for EMI/RFI suppression. A Pi input
filter reduces reflected ripple. Reliable operation is assured through the use of
efficient, design-derated components and by heatsinking all dissipating
elements directly to the metal case. This permits operation from -25
o
C to +71
o
C
with no derating or additional heatsinking required. A and F Series DC/DC
converter are suitable for a wide range of general industrial applications,
especially where low noise levels are required.
SPECIFICATION
OUTPUT SPECIFICATIONS
Line regulation
Load regulation
Cross regulation
Ripple and noise
Transient response
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS
±0.07%, max.
±0.1%, max
±0.07%
±0.1%
Conducted noise
EN55022, EN55011, FCC
Class B
HL to LL, A series
FL to NL, F series
GENERAL SPECIFICATIONS
A series, FL-NL, all outputs
F series, FL-NL, dual output
Voltage balance, duals
5Hz to 20MHz
A series: FL to NL
F series: FL to NL
F series:
FL to 50% FL
Temperature coefficient
Overvoltage protection
Short circuit protection
Efficiency
Isolation Voltage
Switching frequency
Case Material
±0.1% max. dev.,
50µs recovery
±0.5% max. dev.,
75µs recovery
±0.5% max. dev.,
25µs recovery
±0.01%/°C, max.
F series,
5 Volt output models only
6.8VDC
Relative humidity
Altitude
See table on facing page
See Note 5
(6)
63% min.
Input/Output
Fixed
500VDC
20kHz
Black coated copper
with non-conductive base
50g (1.77oz)
MIL-HDBK-217E
680,000 hours
±1.0%, max
40mV pk-pk, max.
1mV rms, max.
Weight
MTBF
ENVIRONMENTAL SPECIFICATIONS
Temperature
Operating ambient
-25°C to +71
o
C
Non-operating
–55°C to +85°C
Case
+95
o
C, max.
Derating
None required
Cooling
Free-air convection
Non-condensing
Operating
Non-operating
5% to 95% RH
10,000 feet max.
40,000 feet max.
A series, output to common 150% Iout
F series, output to common 160% Iout
INPUT SPECIFICATIONS
Input voltage range
Input filter
Pi network
INPUT VOLTAGE RANGES
NOMINAL INPUT
5VDC
48VDC
A SERIES
4.75 to 5.25V
42.0 to 56.0V
F SERIES
4.75 to 5.5V
PAGE 1
