IC1F-40RD-1.27SHA
| Model | IC1F-40RD-1.27SHA |
| Description | PC Card Socket Connector Complies with PC card Standard |
| PDF file | Total 4 pages (File size: 117K) |
| Chip Manufacturer | HRS |
PC Card Socket Connector Complies with PC card Standard
IC1 Series
sFeatures
1. Compliant with PC Card Standards
Polarized entry prevents wrong insertion into a
corresponding connector. And sequential
contact engagement prevents electorostatic
discharge,avoiding possible damage to sensitive
board circuits.
2. Suited to Automatic Mounting
Packaged for a board placement with aoutmated
equipment.
3. Lead Offset
Available with several board termination
levels,to allow use of different height board
components.
In relation to the center line of connector,-
0.2mm,+0.3mm,+0.55mm,+0.9mm and
terminations on board center are available.
-55ç to +85ç (Note 1)
95% R.H. max.
(No condensation)
Specification
1000M ohms min.
No flashover or insulation breakdown.
40 m
ohms
max. (initial value) (Note 3)
No electrical discontinuity of 100ns or
more
500 V DC
500 V AC / 1 minute
1 mA
Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or
acceleration of 147 m/s
2
(peak), 4 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
-55ç, 30 min
/15
to 30ç, within 5 min/85ç, 30 min
/15
to 35ç, within 5 min, for 5 cycles
10000 cycles at 400 to 600 cycles per hour
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Storage temperature
Storage humidity
Conditions
-40ç to +70ç (Note 2)
40% to 70% (Note 2)
sProduct
Specifications
Current rating 0.5 A
Ratings
Voltage rating 125 V AC
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Operating temperature
Operating humidity
5.
Humidity (Steady state)
Insulation resistance: 100 M
ohms
min.
6.
Temperature cycle
7.
Durability
(Insertion/withdrawal)
8. Resistance to
soldering heat
No damage, cracks, or parts looseness.
Change of contact resistance from the
start should be 20 m
ohms
max.
No deformation of components
affecting performance.
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
sMaterials
Part
Insulator
Contact
Material
PPS
IC1K,IC1HA:Phosphor bronze
Others:Beryllium copper
Finish
Color : Black
Contact Area : gold plating
Lead Area
: solder plating
Remarks
UL94V-0
-----------------
A52
