JANHCC1N6634C
| Model | JANHCC1N6634C |
| Description | Zener Diode, 3.9V V(Z), 2%, 5W, Silicon, Unidirectional, DIE-2 |
| PDF file | Total 22 pages (File size: 89K) |
| Chip Manufacturer | MICROSEMI |
This is an advance copy of the dated document. The final document from Defense Automated Printing Service may be slightly
different in format due to electronic conversion processes. Actual technical content will be the same.
The documentation and process conversion measures necessary to
comply with this revision shall be completed by 10 November 1999.
INCH POUND
MIL-PRF-19500/356F
10 August 1999
SUPERSEDING
MIL-S-19500/356E
11 November 1996
PERFORMANCE SPECIFICATION
SEMICONDUCTOR DEVICE, DIODE, SILICON, VOLTAGE REGULATOR
TYPES 1N4954 THROUGH 1N4996, 1N5968, 1N5969, AND 1N6632 THROUGH 1N6637,
1N4954US THROUGH 1N4996US, 1N5968US, 1N5969US, AND 1N6632US THROUGH 1N6637US,
AND C AND D TOLERANCE SUFFIX DEVICES
JAN, JANTX, JANTXV, JANJ, JANS, JANHC, AND JANKC
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the performance requirements for silicon, voltage regulator diodes. Five levels of product
assurance are provided for each encapsulated device type as specified in MIL-PRF-19500, and two levels of product assurance for
each unencapsulated device type die.
1.2 Physical dimensions. See figures 1, 2, 3, 4, and 5.
1.3 Maximum ratings. Maximum ratings are as shown in columns 8 and 10 of table IV herein, and as follows:
P
T
= 5 W at T
L
= +65°C, L = .375 inch (9.53 mm), derate 45 mW/°C above T
L
= +65°C (1N4954 through 1N4996). 1/
P
T
= 5 W at T
L
= +25°C, L = .375 inch (9.53 mm), derate 33 mW/°C above T
L
= +25°C (1N5968, 1N5969, 1N6632 through
1N6637). 1/
P
T
= 5 W at T
EC
= +125°C, derate 100 mW/°C above T
EC
= +125°C for US suffix devices.
-55°C < T
op
< +175°C (ambient); -65°C < T
STG
< +175°C (ambient).
Barometric pressure reduced (high altitude operation): 8 mm Hg.
1.4 Primary electrical characteristics. Primary electrical characteristics are as shown in columns 2, 12, and 14 of table IV herein,
and as follows:
R
JL
= 22°C/W (max) at L = .375 inch (9.53 mm) (1N4954 through 1N4996). 1/
R
JL
= 30°C/W (max) at L = .375 inch (9.53 mm) (1N5968, 1N5969, 1N6632 through 1N6637). 1/
R
JEC
= 7°C/W (max) (surface mount) (1N4954 through 1N4996).
R
JEC
= 10°C/W (max) (surface mount) (1N5968, 1N5969, 1N6632 through 1N6637).
1/ Does not apply to surface mount devices.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this
document should be addressed to: Commander, Defense Supply Center Columbus, ATTN: DSCC-VAT, 3990 East Broad Street,
Columbus, OH 43216-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end
of this document or by letter.
AMSC N/A
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
FSC 5961
