JANKCA1N4581
| Model | JANKCA1N4581 |
| Description | DIODE 6.4 V, SILICON, VOLTAGE REFERENCE DIODE, HERMETIC SEALED, DIE-3, Voltage Reference Diode |
| PDF file | Total 21 pages (File size: 963K) |
| Chip Manufacturer | CDI-DIODE |
The documentation and process conversion
measures necessary to comply with this revision
shall be completed by 1 October 2004.
INCH-POUND
MIL-PRF-19500/452G
1 July 2004
SUPERSEDING
MIL-PRF-19500/452F
18 September 2003
* PERFORMANCE SPECIFICATION SHEET
SEMICONDUCTOR DEVICE, DIODE, SILICON, LOW LEVEL VOLTAGE-REFERENCE,
TEMPERATURE COMPENSATED, TYPES 1N4565A-1 THROUGH 1N4584A-1, AND 1N4565AUR-1
THROUGH 1N4584AUR-1, JAN, JANTX, JANTXV, JANS, JANHC, AND JANKC, RADIATION HARDENED
(TOTAL DOSE ONLY) TYPES JANTXVM, D, L, R, F, G, H; JANSM, D, L, R, F, G, H;
JANHCM, D, L, R, F, G, H; AND JANKCM, D, L, R, F, G, H
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
*
1. SCOPE
* 1.1 Scope. This specification covers the performance requirements for 6.4 volts ±5 percent, silicon, low bias
current, voltage-reference, temperature compensated diodes. Four levels of product assurance are provided for each
encapsulated device type as specified in MIL-PRF-19500, and two levels of product assurance for each
unencapsulated device type die. Seven levels of radiation hardened (total dose only) product assurance are provided
for each encapsulated device type, and two levels of product assurance for each unencapsulated device type die as
specified in MIL-PRF-19500.
1.2 Physical dimensions. See figure 1 (DO-7 and DO-35), figure 2 (DO-213AA), figure 3 (JANHCA and JANKCA),
figure 4 (JANHCB and JANKCB), and figure 5 (JANHCC and JANKCC).
1.3 Maximum ratings. (Unless otherwise specified T
A
= +25°C).
The requirements for acquiring the product described herein shall consist of
this specification sheet and MIL-PRF-19500.
PT
mW
500
TSTG and TJ
°C
-55 to +175
IZM (1)
mA dc
70
Power derating
above TA = +25°C
mW/°C
3.33
(1) To guarantee voltage temperature stability, it is necessary to maintain the proper Iz as specified in
1.4 herein.
* Comments, suggestions, or questions on this document should be addressed to Defense Supply Center,
Columbus, ATTN: DSCC-VAC, P.O. Box 3990, Columbus, OH 43218-3990, or emailed to
. Since contact information can change, you may want to verify the currency of
this address information using the ASSIST Online database at
AMSC N/A
FSC 5961
