JANS6110AUS
| Model | JANS6110AUS |
| Description | Trans Voltage Suppressor Diode, 11.4V V(RWM), Bidirectional, 1 Element, Silicon, GLASS, D-5C, 2 PIN |
| PDF file | Total 5 pages (File size: 521K) |
| Chip Manufacturer | MICROSEMI |
1N6102US thru 1N6137AUS
and 1N6138US thru 1N6173AUS
SCOTTSDALE DIVISION
Voidless-Hermetically-Sealed Surface
Mount Bidirectional Transient Suppressors
DESCRIPTION
This surface mount series of industry recognized voidless-hermetically-
sealed Bidirectional Transient Voltage Suppressor (TVS) designs is
military qualified to MIL-PRF-19500/516 and are ideal for high-reliability
applications where a failure cannot be tolerated. They provide a Working
Peak “Standoff” Voltage selection from 5.2 to 152 Volts with two package
sizes for 500 W and 1500 W ratings. They are very robust in hard-glass
construction and also use an internal metallurgical bond identified as
Category I for high-reliability applications. Both of these are also military
qualified to MIL-PRF-19500/516 and are available as both a non suffix part
and an “A” suffix part involving different voltage tolerances as further
described in note 4 on page 2. These devices are also available in axial-
leaded packages for thru-hole mounting by deleting the “US” suffix (see
separate data sheet for 1N6102 thru 1N6173A). Microsemi also offers
numerous other TVS products to meet higher and lower peak pulse power
and voltage ratings in both through-hole and surface-mount packages.
APPEARANCE
Package “E”
(or “D-5B”)
WWW .
Microsemi
.C
OM
Package “G”
(or “D-5C”)
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
FEATURES
•
•
•
•
•
High surge current and peak pulse power provides
transient voltage protection for sensitive circuits
Triple-layer passivation
Internal “Category
I”
metallurgical bonds
Voidless hermetically sealed glass package
JAN/TX/TXV military qualifications available per MIL-PRF-
19500/516 by adding JAN, JANTX, or JANTXV prefix
(consult factory for 1N6102US and 1N6138US)
JANS available for 1N6103AUS thru 1N6118AUS per
MIL-PRF-19500/516 as well as further options for
screening in accordance with MIL-PRF-19500 for JANS
on all others in this series by using a “MSP” prefix, e.g.
MSP6119AUS, MSP6143AUS, etc.
Axial-leaded equivalents also available (see separate
data sheet for 1N6102 thru 1N6173)
•
•
•
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Military and other high reliability transient protection
Extremely robust construction
Extensive range in Working Peak “Standoff”
Voltage (V
WM
) from 5.2 to 152 V
Available as either 500 W or 1500 W Peak Pulse
Power (P
PP
) using two different size packages
ESD and EFT protection per IEC6100-4-2 and
IEC61000-4-4 respectively
Secondary lightning protection per select levels in
IEC61000-4-5
Square-end-cap terminals for easy placement
Nonsensitive to ESD per MIL-STD-750 Method
1020
Inherently radiation hard as described in Microsemi
MicroNote 050
•
•
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
CASE: Hermetically sealed voidless hard glass with
•
Operating (T
J
) & Storage Temperature: -55
o
C to +175
o
C
o
Tungsten slugs
•
Peak Pulse Power (P
PP
) at 25 C: 500 W for 1N6102US to
•
TERMINATIONS: End caps are solid Silver (Ag)
1N6137AUS and 1500 W for 1N6138US to 1N6173AUS @
with Tin/Lead (Sn/Pb) finish
10/1000 µs (also see Figures 1,2 and 3)
•
MARKING: None
•
Impulse repetition rate (duty factor): 0.01%
•
POLARITY: No polarity marking for these
•
Steady-State Power: 3.0 W for 1N6102US to 1N6137AUS
bidirectional TVSs
and 5.0 W for 1N6138US to 1N6173AUS up to T
EC
= 150
o
C.
o
o
Linearly derate above T
EC
=150 C to zero at T
EC
=175 C.
•
Tape & Reel option: Standard per EIA-481-B
•
Steady-State Power: 2.0 W for 1N6102US to 1N6137AUS
•
Weight: 539 mg for 500 Watt (E Package)
and 3.0 W for 1N6138US to 1N6173AUS @ T
A
= 25
o
C (see
1100 mg for 1500 Watt (G Package)
note and Figure 4 for linear derating at higher temperatures)
•
See package dimensions and recommended pad
•
Thermal Resistance (junction to endcap): 8.3
o
C/W for
layouts on last page for both the “E” (D-5B) and “G”
1N6102US to 1N6137AUS and 5.0
o
C/W for 1N6138US to
(D-5C) size packages
1N6173AUS
•
Solder Temperatures: 260
o
C for 10 s (maximum)
NOTE:
Steady-state power ratings with reference to ambient are for PC boards where thermal resistance from
mounting point to ambient is sufficiently controlled where T
OP
or T
J(MAX)
is not exceeded
Copyright
2004
1-05-2005 REV B
1N6102US – 1N6137AUS
1N6138US – 1N6173AUS
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
