L0130030001
| Model | L0130030001 |
| Description | Interconnection Device |
| PDF file | Total 1 pages (File size: 157K) |
| Chip Manufacturer | AMPHENOL |
SC Connectors
SC - Jumper Cable Assemblies
Description
SC / SC
• FCI’s cable assemblies are available in
several standard lengths as full assemblies
or pigtails.
• All cable assemblies are intermateable
according to the SC-NTT standard.
• FCI’s cable assemblies are factory
mounted and tested according to most
stringent quality requirements.
Fibres
- Multimode types 50/126 µm and
62.5/126 µm, graded index.
- Monomode types 9/126 µm according
CCITT - G 652
Cable
- Single fibre or duplex.
- Coloured outer jacket, Ø 2.4 or 3.0 mm.
- Traction reinforced by the use of aramide
fibres.
- Attenuations single mode cable:
0.45 dB/km at 1300 nm
0.25 dB/km at 1550 nm
- Attenuations multimode cable:
3.2 dB/km at 850 nm
1.0 dB/km at 1300 nm
SC / SC
SC / SC
SC / SC
SC / SC
SC / SC
SC / SC duplex, IEC
SC / SC duplex, IEC
SC / SC duplex, IEC
SC / SC duplex, IEC
SC / SC duplex, IEC
SC / SC duplex, IEC
Pigtails SC
Pigtails SC
Pigtails SC
Pigtails SC
1 meter
3 meter
10 meter
1 meter
3 meter
10 meter
1 meter
3 meter
10 meter
1 meter
3 meter
10 meter
1 meter
3 meter
1 meter
3 meter
Single mode
Single mode
Single mode
Multimode
Multimode
Multimode
Single mode
Single mode
Single mode
Multimode
Multimode
Multimode
Single mode
Single mode
Multimode
Multimode
Part Numbers
L02 30 0100 01
L02 30 0300 01
L02 30 1000 01
L01 30 0100 01
L01 30 0300 01
L01 30 1000 01
L08 20 0100 01
L08 20 0300 01
L08 20 1000 01
L07 20 0100 01
L07 20 0300 01
L07 20 1000 01
L13 30 0100 01
L13 30 0300 01
L12 30 0100 01
L12 30 0300 01
For other cable lengths and mixed connector ends, consult FCI.
All leads can be supplied in PC or APC polishing.
Specific cable requirements and cable harnesses on request.
Termination Tool Kits
FCI’s termination tool kit guarantees an
optimum connector termination in
combination with FCI’s polishing procedure.
The termination tool kit is built in a modular
way and is standard suitable for FCI’s SC
product family.
An extension kit is available for termination of
FCI’s ST product family.
Description
Toolkit for SC connector
Kit of consumables
Extension kit ST
Microscope (200x)
Part Numbers
SCY255
SCY255 A11
SCY255A30
SCY255A24
FCI reserves the right to make any engineering refinements, alterations or improvements deemed necessary on its products. The dimensions
appearing in this catalogue are subject to change without notice. When dimensions are critical detailed drawings should be requested.
