M115TANXX.XXXXMHZ
| Model | M115TANXX.XXXXMHZ |
| Description | Quartz Crystal, |
| PDF file | Total 1 pages (File size: 51K) |
| Chip Manufacturer | MTRONPTI |
M1 Series 5.0 X 7.0 X 1.75 mm HCMOS/TTL
Compatible 5.0 Volt Surface Mount Oscillators
Low Profile, High Performance HCMOS/TTL
Compatible 5.0 Volt Surface Mount Oscillators
Electrical Specifications
NOTE:
A capacitor of value 0.01
µF
or
greater between Vdd and Ground
is recommended.
Pin Connections
1
Tri-state Control Logic
Pin 1 high or floating: clock signal output.
Pin 1 low: output disabled to high impedance.
Because this product is based on AT-strip technology, not all frequencies in the range stated are available.
Contact the factory for availability of specific frequencies.
2
TTL load - See load circuit diagram #1 on page 113. HCMOS load - See load circuit diagram #2 on page 113.
3
Symmetry is measured at 1.4 V with TTL load, and at 50% Vdd with HCMOS load.
4
Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd with HCMOS load.
See page 112, Figure “2” for suggested solder profile.
59
