MAB06057HM
| Model | MAB06057HM |
| Description | Analog Circuit |
| PDF file | Total 3 pages (File size: 566K) |
| Chip Manufacturer | POWERBOX |
Communication Line – MAB06 Series
3 W
2 :1
S IN G LE
&
D U A L
OU TPU T
DC/ DC
C O NV E RT ER
Specifications
INPUT
Input voltage range
5V
12V
24V
48V
5V
12V
24V
48V
Pi type.
±2.0% max.
±1.0% max.
±0.05%/°C.
3.3V/5V
12V/15V
Continuous.
Single/Dual
Single
2
Dual
3
4.5-6V
45-9V
9-18V
18-36V
36-72V
10VDC max
25VDC max
50VDC max
100VDC max
Input surge voltage
(100ms max)
Input filter
OUTPUT
Voltage accuracy
Voltage balance (dual)
Temperature coefficient
Ripple and noise
20MHz BW
Short circuit protection
Line regulation
1
Load regulation
100mV p-p max.
1% p-p max.
±0.5% max.
±0.5% max.
±1.0% max.
Features
• 3W isolated output
• 24-pin DIP package
• Efficiency to 87%
• 2:1 input range
• Regulated outputs
• Pi input filter
• Continuous short circuit protection
• Meet EMI EN55022 class A (“-E” model)
• No tantalum capacitor inside (“-E” model)
• Wide operating temperature range (“-E” model)
• UL60950-1 approval for H/HM versions only
and “-E” model
®
US
ENVIRONMENTAL
Operating ambient temp. –25 to +71°C. “-E” models –40 to +85°C.
Power derating curve
See figure 1.
Derating above 71°C
Linearly to zero power at 95°C (plastic case).
Linearly to zero power at 100°C (copper case).
4
Case temperature
95°C/ 100°C max (plastic/copper case).
Cooling
Natural convection.
Storage temperature
–40 to +100°C.
Humidity
95% RH max non-condensing.
GENERAL
Efficiency
Isolation voltage
See table.
Standard models: 500VDC min.
Suffix “H” models: 3kVDCmin. (non-
conductive black plastic only)
Suffix “HM” models: 1.5kVDC min.
10
9
ohms.
250pF typ.
100KHz, min.
MIL-STD-217F, 2000Khrs typ.
“-E” models 2500Khrs typ.
DIP
31.8 x 20.3 x 10.2 mm.
SMD
31.8 x 20.3 x 11.4 mm.
6
S/HS models
31.8 x 20.3 x 10.4 mm.
Standard
Non-conductive black plastic.
“M” models
Black coated copper with non-
conductive base
“S” models
SMD package
12.5g.
Standard models: Non-conductive black plastic.
Suffix “M”
5
models: Black coated copper with
non-conductive base.
Isolation resistance
Isolation capacitance
Switching frequency
MTBF
Dimensions
E176177
Case material
Weight
Case material
Note:
1. Measured from high line to low line.
2. Measured from full load to 10% load.
3. Measured from full load to 1/4 load.
4. Maximum case temperature under any operating condition should not exceed
95℃(Plastic Case), 100℃(Copper Case).
5. The output noise is measured with 0.1uF MLCC across for SMD package
6. S and HS models for “E” Version Only
20120306
COMMUNICATION LINE
www.powerbox.info
