OAT1041F-V5-B-05-L
Model | OAT1041F-V5-B-05-L |
Description | Transceiver, 1290nm Min, 1330nm Max, 10300Mbps(Tx), 10300Mbps(Rx), FC Connector |
PDF file | Total 13 pages (File size: 221K) |
Chip Manufacturer | OKI |
OC-192/STM-64 SERDES Transceiver module Specification; OAT1041x-V5-z-yy
Document NO: QPS-0302-020
OKI Confidential
Rev. DRAFT 0.5
7. I2C diagnostic monitor (Optional function)
Memory access to the OAT1041 is through the I2C interface.The slave address defaults to A2h.The memory within
the OAT1041 is 128 bytes.The following tables detail the memory contents. All conversions are updated every 13ms
(nominal) or 20ms (max) in rotation.
Table 7 memory map
Table
Address
00h
…
…
58h
60h
68h
70h
78h
−
RxPow MSB
−
Reserved
−
RxPow LSB
−
Reserved
−
−
−
Reserved
−
−
−
Reserved
LsBias MSB
−
−
Reserved
LsBias LSB
−
−
Reserved
LsPow MSB
−
−
Reserved
LsPow LSB
−
−
Reserved
Reserved
00h-7Fh (128bytes)
Byte 0
Byte 1
Byte 2
Byte 3
Byte 4
Byte 5
Byte 6
Byte 7
Laser Bias Current Monitor : LsBias MSB(64h), LsBias LSB(65h)
These bytes contain the MSB (64h) and the LSB (65h) of the measured the laser bias current. This Reads as an
signed 16-bit quantity at 19.073uA LSB,with a maximum range of 125mA.The lower four bits should be ignored.
Normalized Laser Power Monitor : LsPow MSB(66h), LsPow LSB(67h)
These bytes contain the MSB (66h) and the LSB (67h) of the measured the normalized laser output power. This
Reads as an signed 16-bit quantity at 0.000038147 LSB,with a maximum range of 2.5.The Normalized Laser Power
Monitor (BOL) is typ. 0.5.The lower four bits should be ignored.
Received Average Optical Power Monitor : RxPow MSB(68h), RxPow LSB(69h)
These bytes contain the MSB (66h) and the LSB (67h) of the measured the average received optical power. This
Reads as an signed 16-bit quantity at 38.147uW LSB,with a maximum range of 2.5mW.The lower four bits should be
ignored.
OKI Electric Industry Co., Ltd Optical Components Company
12