P10FG-1224Z2:1H30LF
| Model | P10FG-1224Z2:1H30LF |
| Description | Analog Circuit |
| PDF file | Total 4 pages (File size: 138K) |
| Chip Manufacturer | PEAK |
P10FG-xxxxE/Z2:1(H30)LF
PMB-SERIES
Rev.04-2008
2 Watt
2:1
Wide Input
Reg. Single and Dual
Output
1 - 3 kV
DC I/O Isolation
DIP16
case
Contin. Short Circuit Protection
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
The PMB 2Watt series is a family of cost effective 2W single and dual
output DC/DC converters with an optional control Pin (SIP). These
converters are encapsulated in an ultra miniature SIP8 or DIP16 plastic or
metal case. High performance features: continuous / long time short circuit
protection with automatic restart and tight line / load regulation, high
efficiency operation and output voltage accuracy of ±2% maximum.
All specifications typical at Ta=25° nominal input voltage and full load unless otherwise specified
C,
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation
(25% - 100%)
Ripple and Noise
(20Mhz bandwidth)
Temperature Coefficient
General Specifications
I/O Isolation Voltage
(3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF
(MIL-HDBK-217F)
Physical Specifications
Case Material
Potting Material
Weight
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
2:1 Wide Input
(see table)
Capacitor
35 mA pk-pk
± 2%
Indefinite
(Automatic Recovery)
± 0.5%
± 1%
80 mV pk-pk
± 0.02% / °
C
1000 VDC
(3000 VDC optional)*
60 pF
1000 M Ohm
100 - 650 kHz
95% rel H
> 2.732 Mhrs
Non Conductive Black Plastic
(UL94V-0 rated)
Epoxy
(UL94V-0 rated)
~ 6 g, typ.
-40 to +85°
(ambient)
C
100°
C
-40 to +125°
C
Free Air Convection
(10mm distance required)
Soldering 260° max.
(1.5mm from case 10s.)
C,
PMB-Series – P10FG-xxxxE/Z2:1(H30)LF – Single / Dual Output – DIP16 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/4
