P10LU-4812ZLF
| Model | P10LU-4812ZLF |
| Description | Analog Circuit |
| PDF file | Total 4 pages (File size: 149K) |
| Chip Manufacturer | PEAK |
P10LU-xxxxE/Z(Hxx)LF
PM3-SERIES
Rev.02-2009
2 Watt
Unregulated
Single
and
Dual
Output
SIP7
Case
3 - 6 kV
DC I/O Isolation
Low Ripple and Noise
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
The PM3 series P10LU-xxxxE/Z(Hxx)LF is a family of cost effective 2 W
single & dual output DC-DC converters. These converters are in an ultra
miniature SIP7 case. Devices are encapsulated. High performance
features: 3000VDC up to 6000VDC input/output isolation, high efficiency
operation, output voltage accuracy of ±3% maximum, input range of ±10%
tolerance and low output ripple and noise.
All specifications typical at Ta=25° nominal input voltage and full load unless otherwise specified
C,
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation
(20% - 100%)
Ripple and Noise
(20Mhz bandwidth)
Temperature Coefficient
General Specifications
Efficiency
I/O Isolation Voltage
(3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF
(MIL-HDBK-217F)
Physical Specifications
Case Material
Potting Material
Weight
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
RoHS Conform
± 10%
Capacitor
20 mA pk-pk
± 3%
Short Term
± 1.2% / 1% Vin Change
± 10% (3.3 Vout Models: ± 20%)
75 mV pk-pk
± 0.02% / °
C
See table
3000 VDC
(up to 6000 VDC optional)*
60 pF, typ.
1000 M Ohm
80 kHz
(Variable)
95% rel H
>1.121 Mhrs
Non Conductive Black Plastic
(UL94V-0 rated)
Epoxy
(UL94V-0 rated)
~ 2.3g, typ.
-40 to +85 °
(ambient)
C
100°
C
-40 to +125°
C
Free Air Convection
(10 mm distance required)
Soldering 260° max.
(1.5 mm from case 10s.)
C,
PM3-Series – P10LU-xxxxE/Z(Hxx)LF – Single and Dual Output – SIP7 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/4
