QSE773
| Model | QSE773 |
| Description | PLASTIC SILICON PIN PHOTODIODE |
| PDF file | Total 3 pages (File size: 69K) |
| Chip Manufacturer | QT |
QSE773
PLASTIC SILICON PIN PHOTODIODE
PACKAGE DIMENSIONS
0.215 (5.46)
0.199 (5.06)
FEATURES
• Daylight Filter
• Sidelooker Package
• Pin Photodiode
• Wide Reception Angle, 120°
• Chip Size = .107
2
inches (2.71
2
mm)
C
L
0.311 (7.90)
0.288 (7.30)
0.126 (3.20)
0.110 (2.80)
SCHEMATIC
0.610 (15.49)
MIN
ANODE
CATHODE
0.060 (1.52)
0.020 (0.51)
SQ. (2x)
0.100 (2.54)
0.116 (2.95)
0.100 (2.54)
NOTES:
1. Dimensions for all drawings are in inches (mm).
2. Tolerance of ± .010 (.25) on all non-nominal dimensions
unless otherwise specified.
1. Derate power dissipation linearly 2.50 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning
agents.
4. Soldering iron
1/16”
(1.6mm) minimum from housing.
5. As long as leads are not under any stress or spring tension.
6. Light source is an GaAs LED which has a peak emission
wavelength of 940 nm.
7. All measuements made under pulse conditions.
ABSOLUTE MAXIMUM RATINGS
Parameter
Operating Temperature
Storage Temperature
Soldering Temperature (Iron)(2,3,4)
Soldering Temperature (Flow)(2,3)
Reverse Voltage
Power Dissipation(1)
(T
A
= 25°C unless otherwise specified)
Symbol
T
OPR
T
STG
T
SOL-I
T
SOL-F
V
R
P
D
Rating
-40 to +85
-40 to +85
240 for 5 sec
260 for 10 sec
32
150
Unit
°C
°C
°C
°C
V
mW
1 of 3
100032A
