R1113Z161B-TR-FD
Model | R1113Z161B-TR-FD |
Description | Fixed Positive LDO Regulator, 1.6V, 0.65V Dropout, CMOS, PBGA4, PLASTIC, WLCSP-4 |
PDF file | Total 19 pages (File size: 297K) |
Chip Manufacturer | RICOH |
R1113Z SERIES
Non-promotion
LOW NOISE 150mA LDO REGULATOR
NO.EA-101-120404
OUTLINE
The R1113Z Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, resistors, a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load
transient response of the R1113Z Series are excellent, thus these ICs are very suitable for the power supply for
hand-held communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is WL-CSP4-P1
(Wafer Level CSP), high density mounting of the ICs on boards is possible.
FEATURES
•
•
•
•
•
•
•
•
•
•
Ultra-Low Supply Current................................................ Typ. 100μA
Standby Mode ................................................................. Typ. 0.1μA
Low Dropout Voltage....................................................... Typ. 0.23V (I
OUT
=100mA
3.0V Output type)
High Ripple Rejection ..................................................... Typ. 80dB(f=1kHz 3.0V Output type)
Low Temperature-Drift Coefficient of Output Voltage...... Typ.
±100ppm/°C
Excellent Line Regulation ............................................... Typ. 0.05%/V
High Output Voltage Accuracy ........................................
±2.0%
Excellent Dynamic Response
Small Package .............................................................. WL-CSP4-P1 (Wafer Level CSP)
Output Voltage .................................................. ............. Stepwise setting with a step of 0.1V in the range
of 1.5V to5.0V is possible
•
Built-in Chip Enable Circuit (2 types; A: active low, B: active high)
•
Built-in Fold Back Protection Circuit ............................... Typ. 30mA (Current at short mode)
•
Ceramic capacitors are recommended to be used with this IC
APPLICATIONS
•
Power source for cellular phones such as GSM, CDMA and various kinds of PCS.
•
Power source for electrical appliances such as cameras, VCRs and camcorders.
•
Power source for battery-powered equipment.
N
n
o
r
p
-
m
o
t
o
n
o
i
1