R1113Z2.61A-TL
| Model | R1113Z2.61A-TL |
| Description | Regulator |
| PDF file | Total 19 pages (File size: 393K) |
| Chip Manufacturer | RICOH |
PRELIMINARY
R1113Z SERIES
s
OUTLINE
'2001.8.27
LOW NOISE 150mA LDO REGULATOR
The R1113Z Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current,
low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference unit, an error amplifier, resistors,
a current limit circuit, and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function. The line transient response and load transient
response of the R1113Z Series are excellent, thus these ICs are very suitable for the power supply for hand-held
communication equipment.
The output voltage of these ICs is fixed with high accuracy. Since the package for these ICs is WL-CSP (Wafer Level CSP),
high density mounting of the ICs on boards is possible.
s
FEATURES
Ultra-Low Supply Current......................................... Typ. 100µA
Standby Mode ........................................................... Typ. 0.1µA
Low Dropout Voltage ................................................ Typ. 0.23V(I
OUT
=100mA 3.0V Output type)
High Ripple Rejection ............................................... Typ. 80dB(f=1kHz 3.0V Output type)
Low Temperature-Drift Coefficient of Output Voltage Typ. ±100ppm/°C
Excellent Line Regulation ......................................... Typ. 0.05%/V
High Output Voltage Accuracy.................................. ±2.0%
Excellent Dynamic Response
Small Package ..........................................................WL-CSP(Wafer Level CSP)
Output Voltage...........................................................Stepwise setting with a step of 0.1V in the range of 2.0V to 5.0V is
possible
Built-in Chip Enable Circuit ( 2 types; A: active low , B: active high)
Built-in Fold Back Protection Circuit........................Typ. 30mA (Current at short mode)
Ceramic capacitors are recommended to be used with this IC
s
APPLICATIONS
Power source for cellular phones such as GSM, CDMA and various kinds of PCS.
Power source for electrical appliances such as cameras, VCRs and camcorders.
Power source for battery-powered equipment.
Rev. 1.11
-1-
