S102C19K100F
| Model | S102C19K100F |
| Description | Fixed Resistor, Metal Foil, 0.3W, 19100ohm, 300V, 1% +/-Tol, -2,2ppm/Cel, 3011, |
| PDF file | Total 5 pages (File size: 144K) |
| Chip Manufacturer | VISHAY |
S Series
Vishay Foil Resistors
Bulk Metal
®
Foil Technology
High-Performance Aerospace and Instrumentation Resistors
TABLE 4 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182
CHAR J
Test Group I
Thermal Shock
Overload
Test Group II
Resistance Temperature
Characteristic
Low Temp Storage
Low Temp Operation
Terminal Strength
±
0.2%
±
0.2%
±
25ppm/°C
±
0.15%
±
0.15%
±
0.2%
±
0.15%
±
0.1%
±
0.4%
±
0.2%
±
0.2%
S-SERIES
MAXIMUM
∆
R
±
0.01%
±
0.01%
+ 4.5ppm/°C
±
0.01%
±
0.01%
±
0.01%
±
0.01%
±
0.01%
±
0.05%
±
0.01%
±
0.01%
±
0.005%
±
0.005%
±
0.002%
±
0.005%
±
0.002%
±
0.02%
±
0.002%
±
0.002%
S-SERIES
TYPICAL
∆
R
±
0.002%
±
0.003%
THROUGH HOLE
Test Group III
DWV
Resistance to Solder Heat
Moisture Resistance
Test Group IV
Shock
Vibration
Test Group V
Life Test @ 0.3 W/+125°C
2,000 Hours
10,000 Hours
Test Group Va
+70°C Power Rating
Test Group VI
High Temperature Exposure
Test Group VII
Voltage Coefficient
±
0.5%
±
2.0%
±
0.5%
±
2.0%
0.005%/V
±
0.015%
±
0.05%
±0.1%
±
0.1%
< 0.00001%/V
±
0.01%
±
0.03%
±
0.05%
±
0.05%
< 0.00001%/V
STANDARD OPERATIONS & TEST CONDITIONS
A. Standard Test Operations:
By 100% Inspection
•
•
•
•
•
Short-time overload (6.25 x rated power for 5 seconds)
Resistance – tolerance check
Visual and mechanical
TCR
Environmental tests per Table 3 on a quarterly basis to
establish performance by similarity.
Lead test point: 0.5" (12.7 mm) from resistor body
Temperature: + 22°C
±
2°C
Relative humidity: per MIL-Std-202
IMPROVED PERFORMANCE TESTING
The preceding information is based on product directly off the
production line. Improved performance (meaning increased
time stability with load and other stresses) is available
through factory conducted "Improved Performance Testing".
The test routine is usually tailored to the users stabilty
objectives and product that has been screened can be
brought down to a potential load life of less than 50ppm.
Various screen test routines are available and all anticipated
stresses must be taken into account before settling on one
specific test routine. Our Applications Engineering
Department is prepared to discuss and recommend
appropriate routines given the full spectrum of anticipated
stresses and stability requirements.
By Sample Inspection
B. Standard Test Conditions:
•
•
•
SALES
• ISRAEL: foilsales.israel@vishay.com
• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
www.vishay.com
74
For technical questions in the Americas, contact foilsupport1@vishay.com
Document Number: 63001
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
Revision 31-Jan-05
