S1300BMBJ-FREQ-OUT27
| Model | S1300BMBJ-FREQ-OUT27 |
| Description | HCMOS Output Clock Oscillator, 1.5MHz Min, 28.6363MHz Max, |
| PDF file | Total 2 pages (File size: 123K) |
| Chip Manufacturer | DIODES |
SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
Frequency Range:
Frequency Stability:
1.5 MHz to 28.6363 MHz
±20, ±25 or ±50ppm over all conditions: operating
temperature, voltage change, load change, calibration
tolerance, shock and vibration, with V
C
= 1.65V
± 3ppm max per year, ±10ppm max for 10 years
3.3V, HCMOS
S1300 / S1309 Series
Aging @ 25°C:
Temperature Range:
Operating:
Storage:
Supply Voltage:
Recommended Operating:
ACTUAL SIZE
0 to +70°C or -40 to +85°C
-55 to +125°C
3.3V ±10%
10mA typ, 15mA max
Supply Current:
Output Drive:
Description
A 3.3V, voltage controlled crystal oscil-
lator designed primarily to be used in
phase locked loops, phase shift keying,
jitter reduction and other telecommuni-
cation applications. The HCMOS output
can drive both high speed CMOS and
TTL loads. Devices are packaged in stan-
dard 14-pin DIP compatible all metal,
resistance welded packages. Pin 7(4 on
1/2 size) is grounded to reduce EMI.
Applications & Features
•
3.3 Volt operation
•
HCMOS / TTL compatible
•
3.5ps max RMS period jitter
•
Wide range of performance options
available: ±50 to ±100ppm APR*; ±20
to ±50ppm frequency stability
•
Tri-State version available
•
Gull Wing for IR reflow available
Output Waveform
CMOS
T
r
Logic 1
80%V
DD
50%V
DD
20%V
DD
Logic 0
T
f
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Jitter:
Pull Characteristics:
Input Impedance (pin 1):
Frequency Response (-3dB):
Pullability:
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
45/55% max @ 50% V
DD
9ns max 20% to 80% V
DD
10% V
DD
max
90% V
DD
min
30pF
3.5ps max RMS period jitter
50KΩ min
10 kHz min
±50, ±70, ±100ppm APR* min
0.3 to 3.0V
Frequency Increases when Control Voltage Increases
5 or 10% max
1.65V
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-202, Method 211, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Conditions A, B or C
( I or J for Gull Wing)
MIL-STD-883C,
MIL-STD-883C,
MIL-STD-883C,
MIL-STD-883C,
Method
Method
Method
Method
1014, Condition C
1014, Condition A2
1011, Condition A
1004
SYMMETRY
*
APR = (VCXO Pull relative to specified Output Frequency)
–
(VCXO Frequency Stability)
DS-126
REV D
5.1
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
