S1528CGCB-FREQ(T)
| Model | S1528CGCB-FREQ(T) |
| Description | CMOS Output Clock Oscillator, 1.5MHz Min, 27MHz Max, |
| PDF file | Total 2 pages (File size: 118K) |
| Chip Manufacturer | PERICOM |
SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
Frequency Range:
Frequency Stability:
Temperature Range:
Operating:
Storage:
Supply Voltage:
Recommended Operating:
Supply Current:
Output:
ACTUAL SIZE
CMOS / TTL
S1528 Series
1.5 MHz to 27 MHz
±50 ppm over all conditions: operating temperature, voltage change,
load change, calibration tolerance, aging, with V
C
= 2.5V
0 to +70°C, 0 to +85°C, -40 to +85°C
-55 to +125°C
5V ±5%
20mA typ, 30mA max @ 25°C, 40mA max @ operating temp range
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Period Jitter RMS:
Pull Characteristics:
Input Impedance:
Frequency Response (-3dB):
Pullability:
Control Voltage:
Transfer Function:
Linearity:
Center Control Voltage:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Resistance to Soldering Heat:
Environmental:
Thermal Shock:
Moisture Resistance:
Description
A voltage controlled crystal oscillator
providing precise rise and fall times to
drive high performance applications. The
device is packaged in a 6-pin, SMD, J
leaded package. The plastic molded sur-
face mountable package is ideal for to-
day's automated assembly environments.
Applications
• For use with phase-locked loop (PLL)
for clock and data recovery, frequency
translation, or frequency synthesis ap-
plications in video, telephony, and data
communication environments.
• Plastic molded, J-lead SMD package
• TTL and CMOS compatible
• Tri-state output
• For frequencies above 27 MHz, see
SaRonix S1518 Series
• Available as 3.3V version, see SaRonix
S1328 Series
• Available on tape & reel; 24mm tape,
500pcs per reel
Output Waveform
CMOS
T
r
1 LEVEL
80% V
DD
50% V
DD
20% V
DD
0 LEVEL
SYMMETRY
SYMMETRY
2.5 VDC
1.5 VDC
0.5 VDC
GND
T
f
T
r
TTL
T
f
V
DD
See Part Numbering Guide and Output Waveform
5ns max, 20% to 80% V
DD,
CMOS
4ns max, 0.4V to 2.4 VDC, TTL
10% V
DD
max for CMOS or 0.4 VDC max for TTL
V
CC
-0.6 VDC for CMOS or 2.4 VDC min for TTL
50pF or 10 TTL
8ps max
50KΩ min
20kHz
±20, ±50, ±70, ±100 ppm APR* (See Part Numbering Guide)
0.5 to 4.5V
Frequency increases when Control Voltage increases
10% max
2.5V
MIL-STD-883,
MIL-STD-883,
MIL-STD-202,
MIL-STD-883,
MIL-STD-202,
Method 2002, Condition B
Method 2003
Method 211, Conditions A & C
Method 2007, Condition A
Method 210, Condition I or J
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
*
APR = (VCXO Pull relative to specified Output Freq. @ nominal control voltage) – (VCXO Freq. Stability)
DS-147
REV C
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894
