S1550AABB-38.8800
| Model | S1550AABB-38.8800 |
| Description | Oscillator, 38.88MHz Min, 155.52MHz Max, 38.88MHz Nom, Hybrid, |
| PDF file | Total 2 pages (File size: 97K) |
| Chip Manufacturer | DIODES |
SaRonix
Voltage Controlled Crystal Oscillator
Technical Data
Frequency Range:
Frequency Stability:
38.88 MHz to 155.52 MHz
±20, ±25, ±50, or ±100 ppm over all conditions: operating
temperature, supply voltage change, load change, calibration
tolerance, shock and vibration.
±3ppm max per year, ±7ppm max over 10 years
PECL
S1550 Series
Aging @ 25°C:
Temperature Range:
Operating:
Storage:
Supply Voltage (V
CC
):
Supply Current:
ACTUAL SIZE
0°C to +70°C or -40°C to +85°C
-55°C to +125°C
+5.0V ±5%
70mA typ, 100mA max
Output Drive:
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Jitter:
Pull Characteristics:
Input Impedence (Pin 1):
Frequency Response (-3dB):
Pullability:
Control Voltage:
Linearity:
Transfer Function:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
MIL-STD-202, Method 213, Condition F
MIL-STD-883, Method 2003
MIL-STD-202, Method 211, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition A, B or C
(I or J for Gull-wing)
45/55% max @ outputs crossing
1.2ns T
r
max & 1.7ns T
f
max, 20% to 80% of output waveform
V
CC
-1.60 max
V
CC
-1.02 min
50Ω to V
CC
-2V (all outputs require termination)
3.5ps max RMS period jitter
Description
A voltage controlled crystal oscillator
designed primarily for use in phase locked
loops, phase shift keying, ATM, SDH
and network/switch applications. Output
is Motorola 10KH compatible. Device is
packaged in a 14-pin DIP compatible,
resistance welded package. Case is
grounded to Pin 7 to reduce EMI.
Applications & Features
•
Positive supply voltage ECL (PECL)
˜
Complementary outputs
•
Wide frequency range from 38.88 MHz
to 155.52 MHz using SaRonix funda-
mental crystals for exceptional jitter
performance
•
±50 or ±100 ppm minimum APR*
•
Covers wide range of telecommunica-
tion applications
•
Other features such as enable/disable
and negative supply are available in
this series, consult factory
Output Waveforms
Logic 1
80%
V
OH
Min
Outputs
Crossing
20%
Logic 0
SYMMETRY
45% Min, 55% Max
V
OL
Max
50KΩ min
10 kHz min
±50 or ±100 ppm min APR* (V
C
= +2.5 ±2V)
+0.5V to +4.5V
10% max
Frequency increases when control voltage increases
MIL-STD-883,
MIL-STD-883,
MIL-STD-883,
MIL-STD-883,
Method
Method
Method
Method
1014, Condition C
1014, Condition A2
1011, Condition A
1004
*
APR = (VCXO Pull relative to specified Output Frequency)
–
(VCXO Frequency Stability)
DS-157
REV C
5.5
SaRonix
www.pericom.com/saronix
