S1564GABK-168.0000
| Model | S1564GABK-168.0000 |
| Description | Oscillator, 65MHz Min, 168MHz Max, 168MHz Nom, Hybrid, |
| PDF file | Total 2 pages (File size: 257K) |
| Chip Manufacturer | DIODES |
Voltage Controlled Crystal Oscillator
Technical Data
Frequency Range:
Frequency Stability:
65.00 MHz to 168.00 MHz (S1564)
77.76 MHz to 155.52 MHz (S1562)
3.3V PECL
S1562 / S1564 Series
±20, ±25, or ±50 ppm over all conditions: operating temperature,
supply voltage change within rating, load change, aging* shock
and vibration.
5 years @ 40°C average ambient operating temperature
0 to +70°C, 0 to +85°C, -40 to +85°C
-55°C to +105°C
+3.3V ±10%
65mA typ, 100mA max (S1562)
65mA typ, 70mA max (S1564)
45/55% max @ 50% waveform
550 ps max, 20% to 80% of output waveform
≤ V
CC
-1.620V
≥ V
CC
-1.025V
50Ω to V
CC
-2V (all outputs require termination)
1ps RMS (1-sigma) max, in 12khz ~ 40MHz frequency band
20ps max peak-to-peak, measured in 100,000 random samples
50KΩ min
10 kHz min
±50 ppm min APR**
0.3V min to 3.0V max
1.65V
Frequency increases when control voltage increases
10% max
1.65 ±0.3V @25°C
< V
CC
- 1.475V or Open
> V
CC
- 1.165V (Q Output Disabled to a fixed level of Logic 0)
MIL-STD-883, Method 213, Condition F
MIL-STD-883, Method 2003
MIL-STD-883, Method 2004, Conditions B2
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition B (for through-hole)
MIL-STD-202, Method 210, Condition I or J (for Gull Wing and SMD
adapter)
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
*
Aging:
Temperature Range:
Operating:
Storage:
Supply Voltage (V
CC
):
ACTUAL SIZE
Supply Current:
Output Drive:
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Phase Jitter:
Total Jitter:
Pull Characteristics:
Input Impedence (Pin 1):
Frequency Response (-3dB):
Pullability:
Control Voltage:
Center Control Voltage:
Transfer Function:
Linearity:
RMT Center Frequency (f
0
):
Output Enable Characteristics:
Output Enable Voltage (Pin 3):
Disable Voltage:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Description
A voltage controlled crystal oscillator de-
signed primarily for use in phase locked
loops, SONET/ATM/SDH/DWDM
transport & switch applications. Output
is 10KE LVPECL. Device is packaged
in a 14-pin DIP compatible, resistance
welded package. Case is grounded to Pin
7 to reduce EMI. True SMD DIL versions
for IR reflow available; select option "S"
or "U" in part builder.
Applications & Features
•
High-frequency, fundamental-mode
crystal design for ultra low jitter and
superb frequency stability over all
conditions
•
Excellent frequency reference for OC-
12 (STM-4), OC-48 (STM-16), and
OC-192(STM-64) clock generation or
synchronization
•
Forward error correction frequencies
are available
•
Enable/Disable standard
Positive supply voltage 3.3V ECL
•
(PECL), LVDS compatible
•
Complementary outputs on S1564
•
Single output on S1562
•
Wide frequency range from
65 MHz to 168.00 MHz
•
±50 ppm minimum APR**
•
Gull Wing & True SMD option available
for IR reflow
•
See S1569 Series for comparable perfor-
mace in true SMD 9x14mm package
•
See S1566 Series for comparable per-
formance with output frequencies 622
~ 670 MHz
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
**
APR = (VCXO Pull relative to specified Output Frequency)
–
(VCXO Frequency Stability)
Absolute Pull Range relative to specified nominal frequency
www.pericom.com/saronix
DS-189
REV D
