T100-R180-KBW
| Model | T100-R180-KBW |
| Description | Fixed Resistor, Wire Wound, 100W, 0.18ohm, 10% +/-Tol, 400ppm/Cel, Chassis Mount, ROHS COMPLIANT |
| PDF file | Total 1 pages (File size: 34K) |
| Chip Manufacturer | RCD |
TUBULAR WIREWOUND RESISTORS
12 WATT to 1300 WATT
RESISTORS CAPACITORS COILS DELAY LINES
h
↓
H
D
L
T SERIES
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
I.D.
↑
Widest range in the industry!
High performance for low cost
Tolerances to ±0.1%, an RCD exclusive!
Low inductance version available (specify opt.’X’)
For improved stability /reliability, T Series is available
with 24 hour burn-in (specify opt.’EQ’)
Standard Series T:
Tubular design enables high power at
low cost. Specialty high-temp flame resistant silicone
ceramic coating holds wire securely against ceramic core
providing optimum heat transfer and precision perfor-
mance (enabling resistance tolerances to 0.1%).
.38” T12
.66” T20-
T225
OPTIONAL STYLES:
.25”
.25 -.75” typ
M
N
.2 -.5” typ
P
.125” T12
.16” T20-50
.2” T50S-225
Opt. M: Assembled with Thru-Bolt Brackets
Option G: Male Quick-Connect
1/4 x .031” thick [6 x .8mm] male tab Small models are mounted
≈1/4”
above mounting plane,
medium
≈1/2”,
large
≈3/4”.
Mounting kit (2 slotted brackets,
insulators, threaded rod, nuts & washers) may be purchased
separately, specify T50-BRACKET, T80-BRACKET, etc.
210987654321
210987654321
210987654321
Option J: Push-In Bracket (12W - 225W)
Units are supplied with pre-assembled push-in
slotted brackets. Brackets may be purchased
separately, specify T50-PIB, T80-PIB, etc.
(order 2 brackets for each resistor)
.040 x 2”
Option T: Tapped
Single or multi-tapped units avail.
Power rating is reduced by 10%
per tap. Indicate resistance value
and wattage required per section
when ordering.
Opt. A: Axial Lead
(illustrated)
Opt. R: Radial Lead
Lead wires are attached to lug
terminals to enable soldering direct
to PCB. The resistor body can be
supported by leads up to 25W size.
Option L: Insulated Leads
Stranded wire is soldered to lug
terminals and insulated with shrink
tubing. Also available ring terminal
(Opt LR), quick-connect male (LM),
female (LF), and various others.
Option V: Adjustable
Exposed winding enables adjustment of
res.value. Slider divides wattage
rating proportionally. Available on
edgewound and standard winding.
Do not over-tighten.
RCD
Type
T12
T20S
T25
T50
T50S
T75
T80
T100
T150
T175
T225
T300
T500
T600
T750
T1000
T1300
Wattage
Rating
12
20
25
50
50
75
80
100
150
175
225
300
500
600
750
1K W
1.3KW
Resistance Range*
Standard
0.1
Ω
- 10K
0.1
Ω
- 15K
0.1
Ω
- 20K
0.1
Ω
- 40K
0.1
Ω
- 40K
0.1
Ω
- 50K
0.1
Ω
- 60K
0.1
Ω
-100K
0.1
Ω
-130K
0.13
Ω
-150K
0.16
Ω
-165K
0.4
Ω
-220K
0.5
Ω
-250K
0.8
Ω
-300K
0.8
Ω
-400K
1Ω - 500K
1Ω - 750K
Adjustable
(Opt.V)
0.1
Ω
- 3K
0.1
Ω
- 4K
0.1
Ω
- 6K
0.1
Ω
- 12K
0.1
Ω
- 12K
0.1
Ω
- 16K
0.1
Ω
- 18K
0.1
Ω
- 30K
0.1
Ω
-40K
0.13
Ω
-45K
0.16
Ω
-50K
0.4
Ω
- 66K
0.5
Ω
- 75K
0.8
Ω
- 90K
0.8
Ω
-120K
1Ω - 150K
1Ω - 200K
L
1.76 [45]
2.0 [50]
2.0 [50]
4.0 [102]
3.55 [90]
6.0 [152.4]
4.4 [112]
6.4 [163]
7.7 {195]
8.5 [215]
10.5 [267]
10.1 [257]
13 [330]
15.6 [396]
18.1 [460]
21.3 [540]
25.6 [650]
Dimensions, typ.
D
.55 [14]
.55 [14]
.7 [18]
.7 [18]
1.1 [28]
.7 [18]
1.1 [28]
1.1 [28]
1.2 [30]
1.2 [30]
1.2 [30]
1.7 [43]
2.1 [53]
2.1 [53]
2.1 [53]
2.5 [63]
2.7 [69]
I.D. (min)
.2 [5]
.2 [5]
.3 [8]
.3 [8]
.5 [13]
.3 [8]
.5 [13]
.5 [13]
.63 [16]
.63 [16]
.63 [16]
0.9 [23]
1.2 [30]
1.2 [30]
1.2 [30]
1.4[35]
1.4 [35]
Inch[mm]
H
.4 [10]
.4 [10]
.48 [12]
.48 [12]
.67 [17]
.48 [12]
.67 [17]
.67 [17]
.75 [19]
.75 [19]
.75 [19]
1.0 [25]
1.0 [25]
1.0 [25]
1.0 [25]
1.15 [30]
1.15 [30]
h
.08 [2]
.08 [2]
.08 [2]
.08 [2]
.16 [4.0]
.08 [2]
.16 [4.0]
.16 [4.0]
.16 [4.0]
.16 [4.0]
.16 [4.0]
.18 [4.5]
.18 [4.5]
.18 [4.5]
.18 [4.5]
.22 [5.5]
.22 [5.5]
Option M (Mounting Bracket)
M
2.15 [55]
2.6 [65]
2.68 [68]
4.72 [120]
5.12 [130]
6.69 [170]
6.00 [152]
8.00 [202]
9.25 [235]
10 [254]
12 [305]
11.8 [300]
15.1 [383]
17.7 [450]
20.1 [510]
23.4 [595]
27.6 [702]
N
2.6 [65]
3.0 [76]
3.2 [80]
5.2 [132]
5.8 [147]
7.2 [182]
6.7 [171]
8.5 [216]
10 [254]
10.6 [269]
12.6 [321]
13 [329]
16 [406]
18.5 [470]
21.1 [535]
24.2 [615]
30 [762]
P
.12 [3]
.12 [3]
.16 [4]
.16 [4]
.22 [5.5]
.16 [4]
.22 [5.5]
.22 [5.5]
.22 [5.5]
.24 [6]
.24 [6]
.31 [8]
.35 [9]
.35 [9]
.35 [9]
.35 [9]
.35 [9]
* Extended range available
SPECIFICATIONS
Standard Tolerance
Temp. Coefficient
Dielectric Strength
Overload
Operating Temp.
Derating
Temperature Rise
1Ω and above: ±5% (avail. to ±0.1%),
Below 1
Ω: ±
10
%
(avail. to ±1%)
260ppm/°C 1
Ω
and above,
400ppm/°C 0.1
Ω
to 0.99
Ω
(avail. to 20ppm)
1000 VAC (terminal to mounting bracket)
10x rated power for 5 sec.
-55°C to +350°C
.31%/°C above 25°C
≈
250 - 325°C @full rated W
P/N DESIGNATION:
RCD Type
Options:
X, V, T, R, M, L, J, G, EQ, A
(leave blank for standard)
T225
- 1R00 - F B W
Resis.:
4-digit code for 0.1%-1% (3 signif. figures
& multiplier), e.g. R100=0.1Ω, 1R00=1Ω, 1001=1KΩ.
3-digit code for 2%-10% (2 signif. figures & multiplier),
e.g. R10=0.1Ω, 1R00=1Ω, 1000=100Ω, 1001=1K
Tolerance:
K=10%, J=5%, H=3%, F=1%, D=.5%, C=.25%, B=.1%
Packaging:
B = Bulk (standard)
Termination:
W= Pb-free, Q= SnPb (leave blank if either is acceptable)
RCD Components Inc,
520 E.Industrial Park Dr, Manchester, NH, USA 03109
Tel: 603
-
669
-
0054 Fax: 603
-
669
-
5455 Email:sales@rcdcomponents.com
FA027B
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
50
