U.FL-2LP-5016-A-(150)
| Model | U.FL-2LP-5016-A-(150) |
| Description | Cable Assembly, 60V, Communication Cable, |
| PDF file | Total 6 pages (File size: 222K) |
| Chip Manufacturer | HRS |
SMT Ultra-Miniature Coaxial Connectors
U.FL Series
Meets up to 6 GHz requirement
Figure 1. Mating height comparison
(with other Hirose Electric products)
2.4(2.5Max)
U.FL
E.FL
sFeatures
1. Mating heights one of the lowest profiles
Height from the printed circuit board when mates a receptacle with
a (right-angle) plug is 2.5 mm maximum. This low Profile is at the
world’s shortest level.
qSpace
factor of mated connector
Figure 2. U.FL-LP-040 and U.FL-R-SMT
2. Extremely small board occupation area
Dia.0.81
U.FL-R-SMT
U.FL-LP-066
Dia.1.13
Dia.1.32
3. World’s lightest
These are the world’s lightest coaxial connectors.
Receptacle: 15.7 mg
Right-angle plugs
For
Ø
0.81 mm cable: 53.7 mg
For
Ø 1.13 &
1.32 mm cable: 59.1 mg
4. Can be used with a frequency of up to 6 GHz
To meet the frequency requirements of a wide variety of miniature
equipment, these connectors offer high frequency performance
from DC to 6 GHz.
Figure 3. U.FL-LP-066and U.FL-R-SMT
5. Can be used with Automatic Mounting
The embossed tape packaging specification of the receptacles
permits automatic mounting.
6. Use of ultra-fine Teflon cable
From among the types of suitable cable,
Ø
0.8 mm (single shield)
outside diameter ultra-fine Teflon coaxial cable has been made a
standard specification in consideration of improving the
construction qualities and construction area.
An external diameter
Ø1.32
mm (double shield) &
Ø1.13mm (single
shield)
ultra-fine Teflon coaxial cable specification is also available.
2.5Max
7. Simple removal of connectors
The extraction jig permits simple removal of connectors.
8. Mating checks made easy
Subminiature size notwithstanding, the lock sensation permits a
check of sure mating.
sApplications
Mobile phones, wireless communications
equipment, electronic measuring instruments,
GPS, wireless LAN, Bluetooth etc.
2002.3
2.5Max
In comparison with our E.FL Series of SMT coaxial connectors, the
receptacles offer a reduction of approximately 18% of the board
occupation area resulting in an area of just 7.7 mm
2
.
U.FL-R-SMT
U.FL-LP-040
3.2Max
1
