V-101-1A4-T-K
| Model | V-101-1A4-T-K |
| Description | Snap Acting/Limit Switch, SPDT, Momentary, 10A, 8VDC, 2.5mm, Solder Terminal, Short Hinge Lever Actuator, Panel Mount, ROHS COMPLIANT |
| PDF file | Total 16 pages (File size: 1M) |
| Chip Manufacturer | OMRON |
■
Characteristics
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength (see note 2)
0.1 mm to 1 m/s (plunger models)
Mechanical: 600 operations/minute, max.
Electrical: 30 operations/minute, max.
100 MΩ min. (at 500 VDC)
15 mΩ max.
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
V-21, V-16 and V-11:
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
V-15 and V-10:
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 1,000 m/s
2
(approx. 100G) max.
Malfunction:
V-21/V-16/V-15:
300 m/s
2
(approx. 30G) max.
V-11/V10:
200 m/s
2
(approx. 20G) max.
Mechanical: 50,000,000 operations min. (60 operations/minute)
Electrical: V-21/V-16/V-15:
V-11/V-10:
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Ambient operating temperature
Ambient operating humidity
Weight
100,000 operations min. (30 operations/minute)
(V-15 heat resistive: 20,000 operations min. (30 ops/minute))
300,000 operations min. (30 operations/minute)
(V-10 heat resistive: 50,000 operations min. (30 ops/minute))
IEC IP40
Class I
175
-25°C to
80°C
(at 60% RH max.) with no icing
-25°C to 150°C for heat resistive models (at 60% RH max.) with no icing.
85%
max. (for 5°C to 35°C)
Approx. 6.2 g (plunger models)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Life expectancy
Note: 1.
Data shown are of initial value.
2.
The dielectric strength shown is measured using a separator between the switch and metal mounting plate.
3.
For pin plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at
the total travel position.
4.
For testing conditions, contact your OMRON sales representative.
■
Contact Specifications
Item
Contact
Specification
Material
Gap
(standard value)
Inrush current
Minimum applicable load
NC
NO
50 A max.
Silver alloy
1 mm (F gap type) or 0.5 mm (G gap type)
40 A max.
36 A max.
160 mA at 5 VDC
24 A max.
V-21
V-16
V-15
Rivet
Silver
V-11
V-10
Note:
Minimum applicable loads are indicated by
N
standard reference values. This value represents the failure rate at a 60%
(λ
60
) reliability level
(JIS C5003). The equation
λ
60
=0.5 x 10
-6
/ operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
126
Snap Action Switch
V
