V300B2C160AL2
| Model | V300B2C160AL2 |
| Description | Power Supply Module, |
| PDF file | Total 8 pages (File size: 193K) |
| Chip Manufacturer | AZETTLER |
45
Features
•
•
•
•
•
•
•
•
•
•
•
Data Sheet
300V Input Maxi Family
*
DC-DC Converter Module
DC input range: 180 - 375V
Input surge withstand: 400V for 100ms
DC output: 2V - 48V
Programmable output: 10 to 110%
Regulation: ±0.2% no load to full load
Efficiency: Up to 90%
Maximum operating temperature:
100°C at full load
Power density: Up to 100W/cubic inch
Height above board: 0.43 in. (10,9 mm)
Parallelable, with N+M fault tolerance
Low noise ZCS/ZVS architecture
Typical Applications:
off-line systems,
distributed power and electric vehicles
Shown actual size:
4.6 x 2.2 x 0.5 in
117 x 56 x 12,7 mm
Product Overview
This DC-DC converter module uses
second generation power processing, control
Absolute Maximum Ratings
and packaging technologies to provide the
performance, flexibility and cost effectiveness
Parameter
Rating
expected of a mature Power Component.
+In to –In voltage
-0.5 to +375
For example, a plated-cavity core transformer
couples widely separated primary and
+In to –In voltage
400
secondary windings, resulting in low in-to-
PC to –In voltage
-0.5 to +7.0
out parasitic capacitance and noise.
PR to –In voltage
-0.5 to +7.0
High frequency ZCS/ZVS switching,
SC to –Out voltage
-0.5 to +1.5
advanced power semiconductor packaging
and thermal management provide high
–Sense to –Out voltage
1.0
power density with low temperature
Isolation voltage (in to out)
3000
gradients. Extensive use of silicon
Isolation voltage (in to base)
1550
integration results in 1/3 the part count
Isolation voltage (out to base)
500
of a first generation converter.
Storage temperature
-40 to +125
-20 to +100
500 (260)
750 (390)
5 (.57)
Unit
Vdc
Vdc
Vdc
Vdc
Vdc
Vdc
Vrms
Vrms
Vrms
°C
°C
°F (°C)
°F (°C)
in-lbs (N-m)
Notes
<100ms
“C” Grade
“C” Grade
<5 sec; wave solder
<7 sec; hand solder
6 each, # 4-40 or M3
Part Numbering
Operating temperature
Pin soldering temperature
Pin soldering temperature
Mounting torque
V 300 A 5 C 400 A
Input
Voltage
A = Maxi
B = Mini
C = Micro
Output
Voltage
Output
Power
Product Grade Temperatures (°C)
Grade
Storage
Operating
C
= - 40 to +125
- 20 to +100
T
= - 40 to +125
- 40 to +100
- 40 to +100
H
= - 55 to +125
M
= - 65 to +125
- 55 to +100
Thermal Resistance and Capacity
Parameter
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20263)
Baseplate to ambient
Baseplate to ambient; 1000 LFM
Thermal capacity
Min
Typ
0.08
0.07
4.9
1.1
165
Max
Unit
°C/Watt
°C/Watt
°C/Watt
°C/Watt
Watt-sec/°C
For long pin configuration add “L” to the
end of the part number. Slotted baseplate
(style 1) requires no designator. For
threaded baseplate add a “2” to the end of
the part number. For thru-hole, add a “3”.
See page 7 for dimensions.
* The modules described here are the highest power for each output voltage.
Consult factory for availability of lower power units.
Vicor Corporation
Tel: 800-735-6200 • 978-470-2900 • Fax: 978-475-6715
Page 1 of 8
The latest data sheets for individual models are available on the Vicor website at www.vicr.com
