W.FL-LP-04N2-A-L
| Model | W.FL-LP-04N2-A-L |
| Description | Ultra Small Surface Mount Coaxial Connectors - 1.4mm Mated Height |
| PDF file | Total 6 pages (File size: 387K) |
| Chip Manufacturer | HRS |
sUsage
Precautions
1. Plugs
1) Mating.
1)
Both parts must be aligned on the axis to mate correct. Press down firmly. A tactile “click” will confirm fully
mated condition.
2) Un-mating.
1)
Fully insert the tool under the plug’s flanges as shown.
W.FL-LP-N plug extraction tool
1)
Apply even force upward until the plug is free.
W.FL Cable
Assembly
(1) Mating/ un-mating
W.FL-R-SMT-1
Do not twist, apply excessive forces or sharp bends to the cable.
W.FL-LP-040
Cable Assembly
×
2N max
(2) Cable handling
W.FL-R-SMT-1
Receptacle
×
(3) Precautions
Do NOT forcefully twist or deform wires.
2. Receptacles
(1) Recommended soldering
temperature profile
Temperature on Top Portion of Part
［ç�½
260
240
220
200
180
160
140
120
100
80
Peak temperature and time
240ç 3 seconds
183ç
Preheating (130ç to 165ç)
Within 2 minutes
40 to 50 seconds
Time
1) The temperature profile indicates the board surface temperature at the point of contacts with the connector
terminals.
2) The temperature may vary, depending on the board size, the solder paste type and thickness.
(2) Recommended screen thickness
0.1 to 0.12 mm
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
6
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
