• Inventory
  • Products
  • Technical Information
  • Circuit Diagram
  • Data Sheet
Data Sheet
Home > Data Sheet > W39L512
W39L512

W39L512

Model W39L512
Description 64K 8 COMS FLASH MEMORY
PDF file Total 25 pages (File size: 300K)
Chip Manufacturer WINBOND
W39L512
64K
×
8 CMOS FLASH MEMORY
1. GENERAL DESCRIPTION
The W39L512 is a 512Kbit, 3.3-volt only CMOS flash memory organized as 64K
×
8 bits. For flexible
erase capability, the 512Kbits of data are divided into 16 small even pages with 4 Kbytes. The byte-
wide (× 8) data appears on DQ7
DQ0. The device can be programmed and erased in-system with a
standard 3.3V power supply. A 12-volt V
PP
is not required. The unique cell architecture of the
W39L512 results in fast program/erase operations with extremely low current consumption (compared
to other comparable 3.3-volt flash memory products). The device can also be programmed and erased
by using standard EPROM programmers.
2. FEATURES
Single 3.3-volt operations
3.3-volt Read
3.3-volt Erase
3.3-volt Program
Flexible 4K-page size can be used as
Parameter Blocks
1K/10K
Typical program/erase cycles:
Twenty-year data retention
Low power consumption
Fast Program operation:
Byte-by-Byte programming: 50
µS
(max.)
Fast Erase operation: 100 mS (max.)
16 even pages with 4K bytes
Any individual page can be erased
Optional 8K byte Top/Bottom Boot Block with
lockout protection
Active current: 10 mA (typ.)
Standby current: 15
µA
(typ.)
End of program detection
Read access time: 70/90 nS
Software method: Toggle bit/Data polling
TTL compatible I/O
JEDEC standard byte-wide pinouts
Available packages: 32-pin PLCC and
Hardware protection:
32-pin STSOP (8 x 14 mm)
-1-
Publication Release Date: July 9, 2002
Revision A2
Go Upload

* Only PDF files are allowed for upload

* Enter up to 200 characters.