W45B012
Model | W45B012 |
Description | 1M x 1 SERIAL FLASH MEMORY |
PDF file | Total 16 pages (File size: 282K) |
Chip Manufacturer | WINBOND |
Preliminary W45B012
1M
×
1 SERIAL FLASH MEMORY
GENERAL DESCRIPTION
The W45B012 is manufactured with Winbond’s high performance CMOS WinFlash technology. The
Serial Flash is organized as 32 sectors of 4096 Bytes for the W45B012. The memory is accessed for
Read or Erase/Program by the SPI bus compatible serial protocol. The bus signals are: serial data
input (SI), serial data output (SO), serial clock (SCK), write protect (#WP), chip enable (#CE), and
hardware reset (#RESET). This device is offered in 8L SON and 32L PLCC package.
FEATURES
•
•
Single 2.7
−
3.6V Read and Write Operations
Serial Interface Architecture
−
SPI Compatible: Mode 0 and Mode 3
•
Automatic Write Timing
−
Internal
VPP
Generation
End-of-Write Detection
−
Software Status
20 MHz Max Clock Frequency
Hardware Reset Pin (#RESET)
−
Resets the device to Standby Mode
TTL Compatibility
Hardware Data Protection
−
Protects/Unprotects the device from Write
operation
•
•
•
Byte Serial Read with Single Command
Superior Reliability
−
Endurance: 10,000 Cycles (typ.)
−
20 years Data Retention
•
•
•
Low Power Consumption
−
Active Current: 30 mA (max)
−
Standby Current: 15
µA
(max)
•
•
•
Sector or Chip-Erase Capability
−
Uniform 4 KByte sectors
Fast Erase and Byte-Program
−
Chip-Erase Time: 100 mS (Max.)
−
Sector-Erase Time: 25 mS (Max.)
−
Byte-Program Time: 50
µS
(Max.)
•
Packages Available
−
8 SON (5 x 6 mm), 32L PLCC
•
-1-
Publication Release Date: April 18, 2002
Revision A1