W49F002UT12B
| Model | W49F002UT12B |
| Description | 256K X 8 CMOS FLASH MEMORY |
| PDF file | Total 23 pages (File size: 300K) |
| Chip Manufacturer | WINBOND |
W49F002U
256K
×
8 CMOS FLASH MEMORY
GENERAL DESCRIPTION
The W49F002U is a 2-megabit, 5-volt only CMOS flash memory organized as 256K
×
8 bits. The
device can be programmed and erased in-system with a standard 5V power supply. A 12-volt V
PP
is
not required. The unique cell architecture of the W49F002U results in fast program/erase operations
with extremely low current consumption (compared to other comparable 5-volt flash memory
products). The device can also be programmed and erased using standard EPROM programmers.
FEATURES
•
Single 5-volt operations:
−
5-volt Read
−
5-volt Erase
−
5-volt Program
Fast Program operation:
−
Byte-by-Byte programming: 35
µS
(typ.)
Fast Erase operation: 100 mS (typ.)
Fast Read access time: 70/90/120 nS
Endurance: 10K cycles (typ.)
Ten-year data retention
Hardware data protection
One 16K byte Boot Block with Lockout
protection
Two 8K byte Parameter Blocks
•
•
Two Main Memory Blocks (96K, 128K) Bytes
Low power consumption
−
Active current: 25 mA (typ.)
−
Standby current: 20
µA
(typ.)
•
•
Automatic program and erase timing with
internal V
PP
generation
End of program or erase detection
−
Toggle bit
−
Data polling
•
•
•
•
•
•
•
•
•
•
•
•
Latched address and data
TTL compatible I/O
JEDEC standard byte-wide pinouts
Available packages: 32-pin DIP and 32-pin
TSOP and 32-pin-PLCC
-1-
Publication Release Date: April 2000
Revision A2
