Z86C8316PEC
| Model | Z86C8316PEC |
| Description | Z8 MCU MICROCONTROLLERS |
| PDF file | Total 46 pages (File size: 741K) |
| Chip Manufacturer | ZILOG |
C
USTOMER
P
ROCUREMENT
S
PECIFICATION
1
Z86C83/C84
Z8
®
MCU M
ICROCONTROLLERS
FEATURES
Device
Z86C83
Z86C84
ROM
(KB)
4
4
RAM*
(Bytes)
237
237
I/O
Lines
21
17
Voltage
Range
3.0V to 5.5V
3.0V to 5.5V
s
1
Six Vectored, Prioritized Interrupts from Six Different
Sources
Two Analog Comparator Inputs with Programmable
Interrupt Polarity
Two Programmable 8-Bit Timers, each with a 6-Bit
Programmable Prescaler
Auto Latch Mask Option for P00, P01, and P02
Power-On Reset (POR) Timer
Permanent Watch-Dog Timer (WDT) Mask Option
Software-Programmable Pull-Up Resistors
On-Chip Oscillator for Crystal, Resonator or LC
s
Note:
* General-Purpose
s
s
s
s
s
28-Pin DIP, SOIC, and PLCC Packages
s
Clock Speed: 16 MHz
s
Three Expanded Register Groups
s
8-Channel, 8-Bit A/D Converter with Track and Hold,
and Unique R-Ladder A
GND
Offset Control
Z86C84 has two 8-Bit D/A Converters
Programmable Gain Stages, 3
µ
s Settling Time
with
s
s
s
GENERAL DESCRIPTION
The Z86C83/C84 Consumer Controller Processors
(CCP
™
) are full-featured members of the CMOS Z8 micro-
controller family offering a unique register-to-register ar-
chitecture that avoids accumulator bottlenecks for higher
code efficiency than RISC processors.
The Z86C83/C84 are designed to be used in a wide variety
of embedded control applications, such as appliances,
process controls, keyboards, security systems, battery
chargers, and automotive modules.
For applications requiring powerful I/O capabilities, the
Z86C83/C84 devices can have up to 21/17 (C83/C84
respectively) pins dedicated to input and output. These
lines are grouped into three ports, and are configured by
software to provide digital/analog I/O timing and status
signals.
An on-chip, half-flash 8-bit
±
1/2 Least Significant Bit (LSB)
A/D converter can multiplex up to eight analog inputs.
Unused analog inputs revert to standard digital I/O use.
Unique, programmable A
GND
offset control of the A/D
resistor ladder compresses the converter's dynamic range
for maximum effective 9-bit A/D resolution.
The Z86C84 has two 8-bit
±
1/2 LSB D/A converters. High
and low reference voltages provide precise control of the
output voltage range. Programmable gain for each D/A
converter provides a maximum effective 10-bit resolution
for many tasks.
On-chip 8-bit counter/timers with many user-selectable
modes simplify real-time tasks, such as counting, timing,
and generation of PWM signals.
The designer can prioritize six different maskable,
vectored, internal or external interrupts for efficient
interrupt handling and multitasking functions.
DS96DZ80203
1
