Perforated board mounted socket

type

Type busbar connector - board mounted socket spacing: 2mm (perforated)

Number of poles per row 2-40

Number of double row poles 4-80

Spacing 2mm

Entry angle 180? Top Entry

Color - Resin Black

electrical

Current per contact 2.00A

Voltage -250V

Contact resistance 20 m Ω Max

Insulation resistance 500 M Ω Min

Withstand voltage 100V AC r.m.s

Working temperature range -25 ° C? C~%2B85? C

Material Science

Material - Metal Brass

Material - contact electroplated with gold

Material - terminal electroplated with gold/tin

Material - Resin PA6T UL94V-0

How to connect the socket

1. The square middle terminal on the three hole plug is usually used to connect the ground wire, the lower left terminal is usually used to connect the zero wire, and the lower right terminal is usually used to connect the live wire. To avoid connection errors, we can also check in detail whether there are labeled letters next to the terminal.

2. If there is a letter labeled "L" next to the terminal, then this terminal should be connected to the live wire. If the letter labeled is "N", then this terminal should be connected to the zero wire. If the letter labeled is "E", then this terminal should be connected to the ground wire.

3. After connecting the wires, the screws on each terminal should be tightened so that they can be fixed to the copper core wire of the wire. Then fix the crimping strip above the wire, and use a screwdriver to tighten the screws on the crimping strip. Just cover the cover of the three hole plug back and install the screws back.