B3164U
| Model | B3164U |
| Description | solid state crowbar devices |
| PDF file | Total 212 pages (File size: 2M) |
| Chip Manufacturer | TECCOR |
MicroCapacitance (MC) SA SIDACtor Device
MicroCapacitance (MC) SA
SIDACtor
Device
The DO-214AA SA MC
SIDACtor
series is intended for applications sensitive to load
values. Typically, high speed connections require a lower capacitance. C
O
values for the
MicroCapacitance device are 40% lower than a standard SA part.
This MC
SIDACtor
series is used to enable equipment to meet various regulatory
requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-
968 (formerly known as FCC Part 68).
Electrical Parameters
Part
Number *
P0080SA MC
P0300SA MC
V
DRM
Volts
6
25
V
S
Volts
25
40
V
T
Volts
4
4
I
DRM
µAmps
5
5
I
S
mAmps
800
800
I
T
Amps
2.2
2.2
I
H
mAmps
50
50
C
O
pF
45
25
* For surge ratings, see table below.
General Notes:
• All measurements are made at an ambient temperature of 25 °C. I
PP
applies to -40 °C through +85 °C temperature range.
• I
PP
is a repetitive surge rating and is guaranteed for the life of the product.
• Listed
SIDACtor
devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• V
DRM
is measured at I
DRM.
• V
S
is measured at 100 V/µs.
• Special voltage (V
S
and V
DRM
) and holding current (I
H
) requirements are available upon request.
• Off-state capacitance is measured at 1 MHz with a 2 V bias.
Surge Ratings
I
PP
2x10 µs
Amps
150
I
PP
8x20 µs
Amps
150
I
PP
10x160 µs
Amps
90
I
PP
10x560 µs
Amps
50
I
PP
10x1000 µs
Amps
45
I
TSM
60 Hz
Amps
20
di/dt
Amps/µs
500
Series
A
http://www.teccor.com
+1 972-580-7777
2-8
SIDACtor
®
© 2002 Teccor Electronics
Data Book and Design Guide
