• Inventory
  • Products
  • Technical Information
  • Circuit Diagram
  • Data Sheet
Data Sheet
Home > Data Sheet > C0402C473M8PAC7867
C0402C473M8PAC7867

C0402C473M8PAC7867

Model C0402C473M8PAC7867
Description Cap,Ceramic,47nF,10VDC,20% -Tol,20% +Tol,X5R TC Code,-15,15% TC,0402 Case
PDF file Total 18 pages (File size: 890K)
Chip Manufacturer KEMET
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) – X5R Dielectric, 4 – 50 VDC (Commercial Grade)
Electrical Parameters/Characteristics
Item
Operating Temperature Range
Capacitance Change with Reference to +25°C and 0 VDC Applied (TCC)
Aging Rate (Maximum % Cap Loss/Decade Hour)
Dielectric Withstanding Voltage
Dissipation Factor (DF) Maximum Limits @ 25ºC
Insulation Resistance (IR) Limit @ 25°C
-55°C to +85°C
±15%
4.0%
250% of rated voltage
(5 ±1 seconds and charge/discharge not exceeding 50 mA)
See Dissipation Factor Limit Table
See Insulation Resistance Limit Table
(Rated voltage applied for 120 ±5 seconds @ 25°C)
Parameters/Characteristics
Regarding aging rate: Capacitance measurements (including tolerance) are indexed to a referee time of 48 or 1,000 hours. Please refer to a part number specific
datasheet for referee time details.
To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and dissipation factor (DF) measured under the following conditions:
1 kHz ±50 Hz and 1.0 ±0.2 Vrms if capacitance ≤ 10 µF
120 Hz ±10 Hz and 0.5 ±0.1 Vrms if capacitance > 10 µF
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Dielectric
Rated DC
Voltage
> 25
X5R
25
< 25
< 25
Capacitance
Value
All
< 0.56 µF
≥ 0.56 µF
Dissipation Factor
(Maximum %)
3.0
7.5
7.5
12.0
±20%
10% of Initial Limit
Capacitance
Shift
Insulation
Resistance
Dissipation Factor Limit Table
Rated DC Voltage
50 – 200 V
25 V
< 25 V
< 25 V
Capacitance
All
All
< 0.56 µF
≥ 0.56 µF
Dissipation Factor
3%
5%
5%
10%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
C1006_X5R_SMD • 5/7/2012
3
Go Upload

* Only PDF files are allowed for upload

* Enter up to 200 characters.