N010-0550-T601
| Model | N010-0550-T601 |
| Description | Resistive Touch Panel Specification |
| PDF file | Total 7 pages (File size: 322K) |
| Chip Manufacturer | FUJITSU |
FID-550 SERIES
s
7.0 REJECT CRITERIA
Description
Film Dent
Reject Criteria
Area
≥
0.1mm
2
Area
≥
0.05mm
2
& area < 0.1mm
2
Area < 0.05mm
2
Area > 0.1mm
2
Area
≥
0.05mm
2
& area < 0.1mm
2
Area < 0.05mm
2
Area
≥
0.1mm
Area
≥
0.03mm & width <0.1mm and length < 10mm
Area < 0.05mm
: to be zero
: to be max. 5 points
: none specified
: to be zero
: to be max. 5 points
: none specified
: to be zero
: to be max. 1 point
: none specified
Foreign
material
between
glass and film
Dot type
Line type
Scratch
Area
≥
0.1mm
: to be zero
Area
≥
0.03mm & width <0.1mm with length < 80mm : to be max. 1 point
Area < 0.03mm & width <0.1mm with length < 30mm : none specified
Area
≥
0.5mm
2
Area
≥
0.03mm
2
& area < 0.5mm
2
Area < 0.05mm
2
: to be zero
: to be max. 5 points
: none specified
Dot blur or hard coat
missing
Newton Ring
Glass flaw
These must not be seen from Panel film side under a fluorescent lamp (3
wavelength type lamp). Not to be verified form glass side.
To be no flaw which is bigger than that shown in the following diagram. The
number of flaws is not specified.
3mm
5mm
2mm
2mm
s
8.0 GENERAL POINTS OF CAUTION
Touch panels are made of glass, so care must be taken in handling them. Do not stress, pile, bend, lift by the
cable or put any stress on the film, for example moving by film face vacuum. In order to clean wring dry a
cloth which has been emersed in a natural detergent. DO NOT use any organic solvent, acid or alkali solu-
tion. Watch the edge of the panel when cleaning, again for safety reasons.
5
