X17256128DD8M
| Model | X17256128DD8M |
| Description | QPRO Family of XC1700D QML Configuration PROMs |
| PDF file | Total 10 pages (File size: 104K) |
| Chip Manufacturer | XILINX |
0
R
QPRO Family of XC1700D QML
Configuration PROMs
0
2
DS070 (v2.1) June 1, 2000
Product Specification
Features
•
•
•
Certified to MIL-PRF-38535 Appendix A QML
(Qualified Manufacturer Listing.)
Also available under the following Standard Microcircuit
Drawings (SMD): 5962-94717 and 5962-95617.
Configuration one-time programmable (OTP) read-only
memory designed to store configuration bitstreams of
Xilinx FPGA devices
On-chip address counter, incremented by each rising
edge on the clock input
Simple interface to the FPGA requires only one user
I/O pin
Cascadable for storing longer or multiple bitstreams
Programmable reset polarity (active High or active
Low) for compatibility with different FPGA solutions
Low-power CMOS EPROM process
Available in 5V version only
Programming support by leading programmer
manufacturers.
Design support using the Xilinx Alliance and
Foundation series software packages.
Description
The XC1700D QPRO™ family of configuration PROMs pro-
vide an easy-to-use, cost-effective method for storing Xilinx
FPGA configuration bitstreams.
When the FPGA is in Master Serial mode, it generates a
configuration clock that drives the PROM. A short access
time after the rising clock edge, data appears on the PROM
DATA output pin that is connected to the FPGA D
IN
pin. The
FPGA generates the appropriate number of clock pulses to
complete the configuration. Once configured, it disables the
PROM. When the FPGA is in Slave Serial mode, the PROM
and the FPGA must both be clocked by an incoming signal.
Multiple devices can be concatenated by using the CEO
output to drive the CE input of the following device. The
clock inputs and the DATA outputs of all PROMs in this
chain are interconnected. All devices are compatible and
can be cascaded with other members of the family.
For device programming, either the Xilinx Alliance™ or the
Foundation™ series development systems compiles the
FPGA design file into a standard HEX format which is then
transferred to most commercial PROM programmers.
•
•
•
•
•
•
•
•
VCC
VPP
GND
RESET/
OE
or
OE/
RESET
CE
CEO
CLK
Address Counter
TC
EPROM
Cell
Matrix
Output
OE
DATA
DS027_01_021500
Figure 1:
Simplified Block Diagram (does not show programming circuit)
© 2000 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at
All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS070 (v2.1) June 1, 2000
Product Specification
1-800-255-7778
1
