PT0512-4S-025
| Model | PT0512-4S-025 |
| Description | MIL Series Connector, |
| PDF file | Total 24 pages (File size: 5M) |
| Chip Manufacturer | AMPHENOL |
26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I
Amphenol PT/PT-SE MIL-DTL-26482
Series I
MATES WITH ITT CANNON AND SOURIAU
MIL-DTL-26482
The Amphenol MIL-DTL-26482 Series I PT/PT-SE offers high-density contact
arrangements in a circular shell. PT offers solder contacts, PT-SE offers high-
performance crimp contacts, and PT-CE offers a commercial crimp option.
These circular connectors provide quick-disconnect bayonet coupling for rapid
mating and unmating, and several mounting styles and shell sizes.
• Intermateable, intermountable and interchangeable with all
MIL-DTL-26482 connectors
AP PL ICATION S
• Power generators
• Engines
• Sensors
• Motion control
• Off-road vehicles
• Earth-moving equipment
• Ships
• Mobile equipment
• Industrial machinery
• Telecommunications
• Traffic control
F EATURES
RUGGED SHELL
Aluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors
have been used extensively in commercial, military, and aerospace environments. Standard shells accept
all MIL-DTL-26482 accessories.
ENVIRONMENTALLY-SEALED
Complete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial, and wire. Wire
seal is accomplished by multiple ripple design, exceeding the wire sealing requirements of MIL-DTL-26482.
RESISTANT TO MILITARY ENVIRONMENTS
These connectors will operate in temperatures from -67˚F to +257˚F (-55˚C to +125˚C) under the harshest
possible conditions.
WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPACITY
Up to 23 amps with wire gauges from 24 to 12 AWG wire.
RESILIENT INSULATOR & GROMMET
A resilient neoprene insulator and integrated rear wire sealing grommet guarantees a
liquid-tight assembly. Crimp contacts that can be inserted from the rear of the connector are available.
Solder contacts are permanently bonded into the insulator.
SOLDER OR CRIMP GOLD-PLATED CONTACTS
PT connector contacts are gold-plated per MIL-G-45204 type II. PT-CE commercial crimp
contacts are not military-approved, but the PT-SE crimp contacts are built in accordance to
MIL-C-39029. Both types of contacts are crimped with the standard M22520/1 crimp tool. Socket
contacts are closed to eliminate damage from test probes and to help prevent misaligned pins during
engagement. Contact insertion is from the rear of the connector. When the contact is fully inserted,
it snaps securely into retention tines embedded in the insulator. Contact extraction is accomplished
from the front with the proper extraction tool. Pressing the tool plunger pushes the contact out through
the rear of the connector.
AGENCY APPROVALS
• MIL-DTL-26482
• UL#E115497, for solder contacts only
For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers.
Specifications subject to change.
123
