G1-266P-85-1.8
| Model | G1-266P-85-1.8 |
| Description | Processor Series Low Power Integrated x86 Solution |
| PDF file | Total 247 pages (File size: 4M) |
| Chip Manufacturer | NSC |
Geode™ GX1 Processor Series
Integrated Functions
(Continued)
Table 4-24. Graphics Pipeline Configuration Registers (Continued)
Bit
Name
Description
GP_SRC_COLOR_0 Register (R/W)
Default Value = 0000h
GX_BASE+810Ch-810Dh
15:0
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
GX_BASE+810Eh-810Fh
15:0
GP_SRC_COLOR_1 Register (R/W)
Default Value = 0000h
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
Note:
The Graphics Pipeline Source Color register specifies the colors used when expanding monochrome source data in either
the 8-bpp mode or the 16-bpp mode. Those pixels corresponding to clear bits (0) in the source data are rendered using
GP_SRC_COLOR_0 and those pixels corresponding to set bits (1) in the source data are rendered using
GP_SRC_COLOR_1.
GP_PAT_COLOR_0 Register (R/W)
Default Value = 0000h
GX_BASE+8110h-8111h
15:0
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
Note:
The Graphics Pipeline Pattern Color 0-3 registers specify the colors used when expanding pattern data.
GP_PAT_COLOR_1 Register (R/W)
Default Value = 0000h
GX_BASE+8112h-8113h
15:0
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
Note:
The Graphics Pipeline Pattern Color 0-3 registers specify the colors used when expanding pattern data.
GP_PAT_COLOR_2 Register (R/W)
Default Value = 0000h
GX_BASE+8114h-8115h
15:0
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
Note:
The Graphics Pipeline Pattern Color 0-3 registers specify the colors used when expanding pattern data.
GX_BASE+8116h-8117h
15:0
GP_PAT_COLOR_3 Register (R/W)
Default Value = 0000h
8-bpp Mode:
8-bpp color: The color index must be duplicated in the upper byte.
16-bpp Mode:
16-bpp color (RGB)
Note:
The Graphics Pipeline Pattern Color 0-3 registers specify the colors used when expanding pattern data.
GX_BASE+8120h-8123h
31:0
GP_PAT_DATA_0 Register (R/W)
Default Value = 00000000h
GP Pattern Data Register 0:
The Graphics Pipeline Pattern Data registers 0 through 3 together contain 128 bits of pat-
tern data. The GP_PAT_DATA_0 register corresponds to bits [31:0] of the pattern data.
GP_PAT_DATA_1 Register (R/W)
Default Value = 00000000h
GX_BASE+8124h-8127h
31:0
GP Pattern Data Register 1:
The Graphics Pipeline Pattern Data registers 0 through 3 together contain 128 bits of pat-
tern data. The GP_PAT_DATA_1 register corresponds to bits [63:32] of the pattern data.
GP_PAT_DATA_2 Register (R/W)
Default Value = 00000000h
GX_BASE+8128h-812Bh
31:0
GP Pattern Data Register 2:
The Graphics Pipeline Pattern Data registers 0 through 3 together contain 128 bits of pat-
tern data. The GP_PAT_DATA_2 register corresponds to bits [95:64] of the pattern data.
GP_PAT_DATA_3 Register (R/W)
Default Value = 00000000h
GX_BASE+812Ch-812Fh
31:0
GP Pattern Data Register 3:
The Graphics Pipeline Pattern Data registers 0 through 3 together contain 128 bits of pat-
tern data. The GP_PAT_DATA_3 register corresponds to bits [127:96] of the pattern data.
GP_VGA_WRITE Register (R/W)
Default Value = xxxxxxxxh
GX_BASE+8140h-8143h
Note that the register at GX_BASE+82140h is located in the area designated for the graphics pipeline but is used for VGA emulation
purposes. Refer to Table 4-39 on page 166 for this register’s bit formats.
Revision 1.0
131
www.national.com
